Clutch Linkage Picture
 

CAn someone post a picture of the clutch linkage going throught the floor/ firewall? I have a 1964 Suburban 4WD and am trying to determine if what I have is correct. I don't have a shop manual yet.

Re: Clutch Linkage Picture
 

Anyone have a picture of clutch rod going through floor?

Re: Clutch Linkage Picture
 

took a couple for you sorry for the poor quality (mobile pics)
above & below firewall

Re: Clutch Linkage Picture
 

Here is what I have. What is the hole for just above the clutch rod?

Re: Clutch Linkage Picture
 

Speedo cable

Re: Clutch Linkage Picture
 

If I am seeing correctly, that is where your clutch rod should be....in the round hole in the floor where it meets the firewall.

Re: Clutch Linkage Picture
 

I was thinking the rod may be going through the wrong hole as the upper hole sure looks a lot cleaner.

Re: Clutch Linkage Picture
 

Shaq! The clutch down rod don't go thru the rust hole...it go's thru the big neat hole right next to the speedo cable hole (the smaller hole at 11 oclock to the big neat hole). Fix the rust hole though!

Re: Clutch Linkage Picture
 

here is mine from inside engine bay - 65 4spd - 292 6cyl - threaded rod is adjustment off actuator arm

Re: Clutch Linkage Picture
 

scotty, captainfab is correct it goes through the bigger hole just above where the rod is in your picture. It gets a cone shaped rubber boot in the hole. I dont have any pic but i just took one apart last week. I may have still have the boot. I can look if you like? Im in bako also so call if you want, mark ill pm you

Re: Clutch Linkage Picture
 

Grandpa54, If you would like to part with the boot I am interested.

Re: Clutch Linkage Picture
 

I will check tomorrow if i still have it.