![]() |
Kick Panel Vents, Left vs. Right
Guys,
I forgot to mark my left and right kick panel air vents on my 72 C10 when I took them off. They are clearly different on the back side but I can't tell which one is the left or right. Appreciate any assistance. Thanks, Rick |
Re: Kick Panel Vents, Left vs. Right
2 Attachment(s)
Hope this helps. First pic is the left one, second is the right one.
|
Re: Kick Panel Vents, Left vs. Right
Thanks DB
|
Re: Kick Panel Vents, Left vs. Right
Daddy Brim
Those vent look new. The one in my truck are old and the rubber is missing. I have not been aboe to find new ones. |
Re: Kick Panel Vents, Left vs. Right
Speaking of vents, how do you remove them?
|
Re: Kick Panel Vents, Left vs. Right
Quote:
|
Re: Kick Panel Vents, Left vs. Right
Quote:
|
Re: Kick Panel Vents, Left vs. Right
On a non AC cab I don't think it matters which one is which since they both are manual. Not 100% sure of this but can't see why it would matter though.
AC cab the passenger side is vacum operated so it's obvious which one it is. U can buy the new gaskets from most vendor on here.;):chevy: |
Re: Kick Panel Vents, Left vs. Right
Where can I buy a new vent? My drivers side vent was replaced by a plastic bag stuffed into the vent opening.
|
Re: Kick Panel Vents, Left vs. Right
Quote:
|
Re: Kick Panel Vents, Left vs. Right
Quote:
|
Re: Kick Panel Vents, Left vs. Right
2 Attachment(s)
Looking at replacing mine and just ran into these online, they are in back order but looks like your able to find em on Ebay or other sites depending on who had them now.https://www.lmctruck.com/media/secti...1729666-2x.png this is from LMC.
|
Re: Kick Panel Vents, Left vs. Right
I found them at LMC also Manes carry them as well.:chevy:
|
Re: Kick Panel Vents, Left vs. Right
I replaced the seals on mine. Here is a link to my repair thread. Scroll down to post 232.
https://67-72chevytrucks.com/vboard/...698377&page=10 |
Re: Kick Panel Vents, Left vs. Right
I replaced seals on mine. When trying to drill out rivets, most would just spin. Solved by using dremel to cut off head - much faster
|
Re: Kick Panel Vents, Left vs. Right
1 Attachment(s)
Instead of the 10 cent foam, I used silicone sheet, cut oval, pop rivet in place.
|
Re: Kick Panel Vents, Left vs. Right
I have replaced the rivets with 8-32 screws and locking nuts and also used pop rivets with backup washers.
Either way works just as well. Just dont try the pop rivet method without the washers, as they tend to pull through the thin metal without popping. They make a special washer for this purpose. Save yourself some time and head to a real hardware store. Or you can order a bag of them from Grainger, like I did. I think there's about 480 washers left in my bag. |
All times are GMT -4. The time now is 08:27 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com