The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- The 1967-1972 Chevrolet & GMC Pickups Parts Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=8)

- - VA moving sale (https://67-72chevytrucks.com/vboard/showthread.php?t=604693)

wasn't sure where to post this since it will work with both and I am sure that someone will move it if I am in the wrong spot. Also would like to see it all go to a good home so if you don't like the price make an offer. I have never been good at the price thing anyway. thanks for looking

Unity passenger and driver side spot lights $200 for the pair

67-72 steering wheel blinker switch and harness (have 2 of them) $30 per OBO

69 Blazer Rear view mirror $25 shipped

GM NOS Steering column harness adapter $25 OBO

after market steering column harness adapter $20 OBO

Auto Meter oil pressure gauge part number 5721 NIB $45 OBO

Auto Meter Water temp gauge part number 5737 2 1/16 electric gauge includes sensor and fitting NIB $45 OBO

Auto meter Procomp 2 5/8 240 ohms empty/ 33OHMs full Part Number 5417 $55 OBO gauge was lightly used with no signs of wear

Auto Meter 2 5/8 Oil press gauge (older) $30 OBO

67-72 chevy truck/blazer tail light housing $30 OBO

67-72 chevy steering column shifter handle $10 OBO (have 2)

67-72 Chevy truck/blazer ac heater control OE $35 OBO

67-72 Chevy truck/Blazer non ac heater control OE $25 OBO

67-72 chevy truck/blazer ash tray $10 Shipped

67-72 Chevy Truck Blazer column shift rod $10 Shipped

67-72 chevy truck/blazer hood latch and support $50 OBO

If the price is to high make an offer, Just got settled in in St Louis. Trying to clear some room in the tiny basement. I have everything here now so if you need pics let me know

Interested in both holleys pending pics

Quote:

Originally Posted by 71sierragrande (Post 6368925)

Interested in both holleys pending pics

the carb in the pan is what came off of my 72 blazer less than a month ago. the other one came off a friends monte carlo. I ordered a electric choke conversion that is still NIB that I never had the chance to install. the carb that came off my truck is ready to go minus the elec. choke swap. let me know if you need any more pics

sorry about the bolts in the one my 6 year old nephew was playing in the garage

Someone must need some of this stuff. Just make an offer, really don't want to take it with me

Do you have pics of the rear view mirror and the 2 Inch blocks.

Quote:

Originally Posted by 72blazer_mud_bogger (Post 6368897)

67-72 Chevy truck/Blazer non ac heater control OE $40 OBO

Could you post a photo of the non-ac heater control?

Quote:

Originally Posted by mgkgmc (Post 6378280)

Do you have pics of the rear view mirror and the 2 Inch blocks.

sorry 2in blocks ended up in the scrap bin and got junked by mistake.
here is a pic of rear view mirror. I can take some more when I get it unpacked in st Louis.

Quote:

Originally Posted by FreeRangeChicken (Post 6385395)

Could you post a photo of the non-ac heater control?

NON AC heater control

Quote:

Originally Posted by 72blazer_mud_bogger (Post 6387314)

NON AC heater control

Think I'm going to pass. Thanks.

Do you still have the springs for sale? Is there any hardware? What are the part numbers on the Holleys?

I'll pass on the mirror thanks.

Pics of the electric fan please.

Quote:

Originally Posted by Seanext (Post 6393935)

Do you still have the springs for sale? Is there any hardware? What are the part numbers on the Holleys?

Yes still have the front springs and i will get u some part numbers in the morning for the carbs

Quote:

Originally Posted by HotRod C/10 (Post 6393990)

Pics of the electric fan please.

I will get u some pics in the morning when I go to my storage unit

interested in the holley that hasnt been rebuilt. is it a single pumper?

Pics of the ashtray, please?

Quote:

Originally Posted by Seanext (Post 6393935)

Do you still have the springs for sale? Is there any hardware? What are the part numbers on the Holleys?

the second pic is the one that came off my truck, its ready to go but the numbers from the first one is missing a accel pump and I kept it for parts. I never had this one my truck and don't know the condition of the internals

Quote:

Originally Posted by rich67 (Post 6396001)

interested in the holley that hasnt been rebuilt. is it a single pumper?

yes it is but as I told the other guy it is missing the accel pump, I picked it up to use as parts everything else looks to be there.

Quote:

Originally Posted by smitty62 (Post 6396302)

Pics of the ashtray, please?

The ashtray is not with me so if you need some more pics let me know and I will get a friend to take some for you

unity driver and pass side spot lights. never tested them but the member I bought them from said they worked when pulled. The only reason I am selling them is I now realize that if I try to put them back on my blazer I will more than likely rip them off on the trails and they are to nice for me to ruin

Quote:

Originally Posted by HotRod C/10 (Post 6393990)

Pics of the electric fan please.

forgot I had two of them