The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1967 - 1972 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=3)
-   -   Tail light Ideas (https://67-72chevytrucks.com/vboard/showthread.php?t=60527)

Wootdog 07-14-2003 01:21 PM

Tail light Ideas
 
Guys and Gals,
I am trying to get an idea what tail lights would look good on the back of my 67 stepside. Post your ideas and any pics you might have. Thanks, Wootdog

Joe67 07-14-2003 01:31 PM

I am looking at a rear roll pan with some nice thin LED tails on my 67 Stepside :cool: :D

Here are some examples of Stepside rear ends I took at Carlisle this past June:

Carlisle 2003 All Truck Nats

CPNE 07-14-2003 02:06 PM

1 Attachment(s)
Nuthin beats the OE setup IMO. Every other idea I've seen just looks out of place.

chevy1969 07-14-2003 02:09 PM

I like the 60-66 Chevy fleetside pick-up tail lights myself. They are small and clean looking with the trim ring :-)

rlg_67 07-14-2003 02:10 PM

I think it would look cool if you frenched them into the rear fenders. I saw this on a 69 at the car show this weekend. Sweet look!

racedvl 07-14-2003 03:45 PM

These are supposed to be off a 40's f*rd pick-up.

http://www.customclassictrucks.com/c...mage_large.jpg

Longhorn Man 07-14-2003 03:55 PM

I do like that yellow one there.
As much as I like the stock lines and stuff, the tail lights are a bit big and funky on the step sides.

67_SS396 07-14-2003 06:10 PM

Here's mine. Early '50's Chevy trucks and Early F*rds.


http://pic5.picturetrail.com/VOL81/6...0/18758134.jpg

Palf70Step 07-14-2003 06:40 PM

This is not my truck, but this is what I plan on doing for lights on my step...I really like the look of the El Camino/Malibu rear bumper on our trucks.

Longhorn Man 07-14-2003 11:17 PM

I've seen that with the older Elcy bumper...the round tail lights in the same shape bumper as that one. It had been shortened a bit and rechromed.
It looked sweet.

Tim Christian 07-14-2003 11:33 PM

I have some of the orginal ones that are stainless steel they look good.

bobs409 07-15-2003 07:42 AM

1 Attachment(s)
Mine has 65 Impala lights mounted sideways. These were on the truck when I bought it but I like them. They get lots of nice comments at gas stations. :D

Jwill41 07-15-2003 08:27 AM

mine has been shortened

http://pic4.picturetrail.com/VOL61/9...6/21040719.jpg

SWINGSAX68 07-17-2003 08:21 PM

Does anyone have pics of 60-66 fleetside lamps on step fenders???
I was very interested in that.....or even those tail lamps off of a 70 or so VW bus....they look cool....

mcmlxix 07-17-2003 10:18 PM

Look at Harley aftermarket. There are some nice LED bullet lights that would probably look nice.
Here are the ones I bought for my Sporty.
http://www.signaldynamics.com/images...ights/2401.jpg

jjk3 07-17-2003 11:23 PM

The lights on my '68 are setup about the same way rlg_67 said. They look like the stock size taillights, but the previous owner cut out a place in the center of the rear fender for them. There are actually three tabs left on the fender that the lights screw into. The lights stick out maybe 1/4"-3/8". I have no reverse lights though. Looks pretty cool, plus I don't like the look of the stock ones.

I had a really cool idea for lights though. The aftermarket tailgates with the embossed bowtie would look kicka$$ with LEDs around the bowtie. The only problem would be how to mount them. I thought the long thin strip tail lights would work, but the lights would really need to be flush to look good. Haven't really worked out all the flaws, but I love the idea.

gr8scott51 07-18-2003 12:38 AM

Jwill41 has the right idea
 
I saw a stepside with an un-cut El Camino bumper on the back and immediately wanted one, but I sectioned it to wrap around the box, just like Jwill41. Looks smooth and finished, not like the afterthought, functional stock lights. Good luck, Scott

ZOOMY 07-25-2003 02:19 AM

ttt
 
.

casey 07-25-2003 03:39 AM

I like Bobs409 lights, thats sooo coool

VTKidder 07-25-2003 07:21 AM

Kinda like the look of the lights in the bumper....

NSANE68!!! 07-25-2003 10:29 AM

1 Attachment(s)
Here's mine. Gonna be 4 behind PHANTOM billet in roll pan:metal:

Joe67 07-25-2003 12:01 PM

Quote:

Originally posted by bobs409
Mine has 65 Impala lights mounted sideways. These were on the truck when I bought it but I like them. They get lots of nice comments at gas stations. :D
I like that idea, looks good :cool:

jewels. 07-25-2003 02:49 PM

ok - i apologize for the crappy photo, but my scanner has just about crapped out.

when i bought the truck, it had taillights below the bed like this:

http://expert.ics.purdue.edu/~leonar...%20640x480.jpg

but i added aftermarket things:
BTW, THESE AFTERMARKET TAILLIGHTS ARE IN GOOD CONDITION AND ARE FOR SALE IF YOU WANT THEM! (i can give you better pics if you need)
http://expert.ics.purdue.edu/~leonar...20-%20dark.JPG

and then, i found a pair of rusty old originals: (I personally prefer original)

http://expert.ics.purdue.edu/~leonar...%20640x480.JPG

good luck! let us know what you decide!
;) jewels.

72c10step 07-25-2003 02:52 PM

I was thinking of doing the same thing as bobs409, but with a set of 70-73 Camaro taillights I picked up for $20. I was thinking of putting them in a rollpan, but 5 1/2" diameter lights probably won't fit in there.

67cst 07-25-2003 02:53 PM

NSANE Where did you get those?


All times are GMT -4. The time now is 07:58 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com