The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- The 1960 - 1966 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=6)

- - 63 horn cup help (https://67-72chevytrucks.com/vboard/showthread.php?t=605462)

mikeandson

11-23-2013 06:04 PM

63 horn cup help

1 Attachment(s)

Trying to pull my steering wheel and I pulled the horn button and encounters those nasty little wierd screws. See pic. Can anyone tell me what bit will get these out? My local Autozone "pro" had no idea.

davbowen

11-23-2013 06:12 PM

Re: 63 horn cup help

called a clutch head screw. should be to turn them with a flat tip screwdriver, at least I did.

mikeandson

11-23-2013 06:21 PM

Re: 63 horn cup help

Quote:

Originally Posted by davbowen (Post 6384870)

called a clutch head screw. should be to turn them with a flat tip screwdriver, at least I did.

Thanks a bunch!

Daze57

11-23-2013 06:37 PM

Re: 63 horn cup help

spray them real good with pb blaster - should turn using a flat blade

mikeandson

11-23-2013 07:41 PM

Re: 63 horn cup help

Quote:

Originally Posted by Daze57 (Post 6384901)

spray them real good with pb blaster - should turn using a flat blade

Thanks. Anybody know the proper bolt diameter and thread pattern to use with the puller? The bolts in the kit don't work.

VonDog

11-23-2013 08:23 PM

Re: 63 horn cup help

Quote:

Originally Posted by davbowen (Post 6384870)

called a clutch head screw. should be to turn them with a flat tip screwdriver, at least I did.

I heard that they're called Double D. Had them on my door handle on the inside and also on my accelerator pedal. Just used a large flathead screwdriver. And PB blaster!!!

bj383ss

11-23-2013 08:39 PM

Re: 63 horn cup help

I just pulled mine. I used 5/16" coarse thread bolts. Not sure if it was right as mine had pretty bad threads, but I tried some fine thread and they definately didn't work. The steering wheel on mine came off while I was tightening the bolts on the puller down! Real easy. Mine didn't have the D Bolts.

Bret

mikeandson

11-23-2013 08:54 PM

Re: 63 horn cup help

Quote:

Originally Posted by bj383ss (Post 6385043)

Thanks Bret. I tried 5/16 fine. It wouldn't go in, but I felt like the bolt was too big. Just wanted to check before I went and purchased a bunch of different bolts.

Grandpa54

11-23-2013 09:29 PM

Re: 63 horn cup help

They are clutch heads i have had a set for years you could probably google it and find a set. The 30s avd 40s chevy used a lot of them.

All times are GMT -4. The time now is 08:53 AM.