The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- The 1960 - 1966 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=6)

- - Throwout Bearing -- Clips? (https://67-72chevytrucks.com/vboard/showthread.php?t=605750)

bloody hammer

11-25-2013 09:53 PM

Throwout Bearing -- Clips?

2 Attachment(s)

I'm hoping to get some advice on this... I'm finishing up a clutch job and I'm ready to install the transmission this weekend. I have the new throwout bearing but I'm confused about how it clips to the clutch fork. Are these the clips that hold it in place?

1962 Stepside w/ 235

Attachment 1180025

Attachment 1180026

Greg63

11-25-2013 10:12 PM

Re: Throwout Bearing -- Clips?

Those clips are for the shifter linkages.
The throwout bearing just slides on the input shaft of the transmission and the tabs of the fork sit in the race (groove) of the bearing. No clips involved.
Greg.

bloody hammer

11-25-2013 10:25 PM

Re: Throwout Bearing -- Clips?

Ahhh, yes... that makes more sense. I thought there would be clips and these were all that was left in my "parts bucket".

Thanks!

All times are GMT -4. The time now is 06:44 AM.