Stupid Question
 

I know this is a little dumb, but what model of trucks have interchangeable sheetmetal? For example, does C10 interchange any sheetmetal with a C20, but not a C30,40? Just curious. Thanks, Roy

Re: Stupid Question
 

all the same up to c30 doors fenders hood .....doors and hood up to c80 except for the cab forward (short hood) doors are still the same just the front lower corners have been clipped

Re: Stupid Question
 

The C10,20 and 30 bodies are all basically the same within the '60-'63 and '64-'66 years. The C40 and up medium duty trucks do share some body parts that are interchangable with the light duty trucks. These would be the hoods (except for the LCF), doors, cowl panel, and cowl corners. The cabs are basically the same as the light duty trucks, but they don't have a trans hump. However the hump from a light duty cab can be fitted into a medium duty cab. The medium duty cab also has an extra horizontal brace at the upper floor board to firewall area. This can be trimmed or removed for use on a light duty chassis.

Re: Stupid Question
 

Thanks alot. I didn't realize the cabs were basically the same up to the mid size. That's good to know when looking at parts. I had never dealt with anything but the C10, so that's why I didn't know. Thanks again. Roy

Re: Stupid Question
 

Only stupid question is the one you didn't ask, thanks for asking , I
learned some too