Dash cluster parts
 

Getting rid of a few things I don't need. Bought 'nos' gauges off eBay and from the backs they appear to be slightly used. From the front they look nos. have ammeter and 60lb oil gauge. Also have a temp gauge I pulled out of my cluster and replaced with a nos one. Extremely nice looks nos minus the typical faded hot. Also have a nice working tach printed circuit and nice lens (could use a buff). Last thing I have is a speedo that has a 1 mile on it. I reset it then put it on my drill to make sure it operated correctly. The speedo is fair but shows the crack spider like lines if in bright light and also the faded needle. Would like $160 shipped for all in the lower US. Possible partial trade for very nice (restoration quality) tach face. Thanks, feel free to ask any question. As of now I would like to ship all together.


lens and circuit sold
$80 shipped for the 4 gauges and tubes

Re: Dash cluster parts
 

Lens

Re: Dash cluster parts
 

Speedo

Re: Dash cluster parts
 

Printed circuit

Re: Dash cluster parts
 

Also have new light tubes. 2 green for turn signals and 1 red for high beam

Re: Dash cluster parts
 

Is the circuit board and the lens GM or aftermarket? How is the painted numbering/lettering on the lens?

What is a nice tach face worth? I have a couple nice ones but they are on working tachs. That makes it really hard to give one up if you know what I mean :)

Let me know what you think. I am not to interested in the gauges as I have more than enough at this point.

Thank you for your time,
Tom

Re: Dash cluster parts
 

For a nice restoration quality one I can do 120 shipped for everything, I can also send you my tach face to be re screened. Redline gauges does it for $50. I'd rather not split up as of now maybe in a few days. The circuit and lens are both gm and the letters don't have a single imperfection. But the lens will need to be buffed

Re: Dash cluster parts
 

Couldn't get it without the glare but they are all this quality

Re: Dash cluster parts
 

Here are photos of the two tach face plates I have. Not 100% perfect but are very nice for a restored driver in my opinion.

I am really on the fence about parting with either of these. They are so hard to find in good condition.

Do you have a link for Redline? I would like to see one they have done. $50.00 is not bad.

Re: Dash cluster parts
 

http://www.redlineg.com/redlineg/Welcome.html

The top one looks nice, the bottom looks like rust is forming on the white. I may just have mine rescreened. May be the best option.

Re: Dash cluster parts
 

Tom, I'll do 60 shipped for circuit and lens if that's fair.

Re: Dash cluster parts
 

Thank you for the link. I will take the lens and the circuit board for $60.00 shipped. Do you want paypal or MO. let me know. I can send you paypal now.

PM me and I will send you my address. information.

Thank you
Tom

Re: Dash cluster parts
 

let me know if you have redline do yours. I would love to see how they are doing these. I have some overlays but the button has to be removed to make them work.

Thanks again,
Tom

Re: Dash cluster parts
 

Pm sent. Thanks Tom.

Re: Dash cluster parts
 

Ttt

Re: Dash cluster parts
 

Just want to check. You did get my paypal for $60.00 and my address information correct?

Let me know and thank you,
Tom

Re: Dash cluster parts
 

Yup and ill be dropping off in a few hours

Re: Dash cluster parts
 

2 green for turn signals and 1 red for high beam, if ya separate i would b intrested in these

Re: Dash cluster parts
 

There only about $8 to buy new. It would cost more to ship them

Re: Dash cluster parts
 

didnt know they make them, thanx

Re: Dash cluster parts
 

Ttt

Re: Dash cluster parts
 

75 shipped for 4 gauges and turn signal tubes

Re: Dash cluster parts
 

I need a temp gauge. Will you sell it individually?

Re: Dash cluster parts
 

do you still have the 4 gauges for $75? I will take them if you do....
thanks

Re: Dash cluster parts
 

Pm sent