door hinge bolt plates?
Is there anywhere that sells the plates the go inside the pillars that hold the door hinges? Really need a set. the ones I have been taped way to much and the bolt size I would have to go up to is way to large.
|
Re: door hinge bolt plates?
Do you need all 4?
|
Re: door hinge bolt plates?
get a piece of 1/4" plate drill tap install
|
Re: door hinge bolt plates?
Trique mfg. has them in stainless
|
Re: door hinge bolt plates?
Use a threaded insert such as a Recoil, E-Z LOK, or a Heli-Coil. With these you would drill the hole out larger, tap it and install a insert back to the original thread size.
|
Re: door hinge bolt plates?
No I just need 2
|
Re: door hinge bolt plates?
I only need 2
|
Re: door hinge bolt plates?
I probably have 2 good ones, I'll look and see.
|
Re: door hinge bolt plates?
Captianfab you would be a life saver. I really don't want to make these things.
|
Re: door hinge bolt plates?
I've had to make several over the years, really not that bad to do. Hardest part is getting them back in if the "cage" part is gone in the door post.
|
All times are GMT -4. The time now is 12:01 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com