Tilt column help needed please
1 Attachment(s)
Need help guys, I have a tilt steering column in my 66 with a 65 wiring harness, I have to hook up the column to the wiring harness but cant seem to find a wiring diagram for the tilt column. I have been told that most if not all the tilts from 67 to 84 are gm columns and the color codes are the same. I figured out that the yellow wire is the left turn signal and the green is the right. I need to know what the other color wires do.
tilt column wiring 1) black = ? 2) purple = ? 3) light blue= ? 4) white = ? 5) dark blue = ? 6) gray = ? 7) yellow = left turn 8) green = right turn 9) brown = ? 65 wiring harness 1) black = ? 2) purple = ? 3) light blue= ? 4) white = ? 5) dark blue = ? 6) gray = ? 7) yellow = left turn 8) green = right turn I have tried hooking them all up (matching color) but that didn't work the battier died and when you hit the brake pedal the front hood indicator lites would come on. |
Re: Tilt column help needed please
tilt column wiring
1) black = horn ... the horn button grounds this wire to activate the horn relay 2) purple = feed from flasher 3) light blue= LH front turn signal 4) white = feed from brake light switch 5) dark blue = RH front turn signal 6) gray = illumination for auto trans gear indicator 7) yellow = LH rear turn signal & LH brake light 8) green = RH rear turn signal & RH brake light 9) brown = feed from hazard flasher (your 65 won't have this) 65 wiring harness 1) black = horn (same as the black wire on the tilt column) 2) purple = turn signal feed from flasher (same as purple wire on tilt column) 3) light blue= LH front turn signal (same as lt blue on tilt column) 4) white = feed from brake light switch (same as white on tilt) 5) dark blue = RH front turn signal (same as dk blue on tilt) 6) gray = illumination for auto trans gear indicator (same as tilt) 7) yellow = LH rear turn signal & LH brake light (same as tilt) 8) green = RH rear turn signal & RH brake light (same as tilt) So with the exception of that brown hazard flasher feed, all of the other wires should be a direct color to color match. If that doesn't work (and everything was working okay before the tilt column swap) I would suspect a defective switch in the tilt column. |
Re: Tilt column help needed please
2 Attachment(s)
Thank you ray_mcavoy here is the wiring diagram for future use.
|
All times are GMT -4. The time now is 11:29 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com