one piece in place of sliders
 

Any help with info on replacing the side sliding glass with one piece windows would be appreciated.

Thanks

Re: one piece in place of sliders
 

All the rear side window stuff is the same, just flipped and on opposite sides-the right rear window will fit the front left hole, etc. Same for the sliders, except for the mounting tabs-a MIG can take care of that pretty easily.
If you have four solids, two will fit up front, just flipped and on opposite sides.

Re: one piece in place of sliders
 

Please note that you must be a supporting member to post classified items. This includes but is not limited to What Its Worth, Want To Buy, Want To Trade, and For Sale. Please consider supporting the forum by subscribing. Further information on the subscription levels available are located here

If you need any further assistance with that please contact any Admin for help.

Re: one piece in place of sliders
 

Not so- front and rear are different, ever so slightly. Take a CLOSE look and the angles from a side view. There is a post somewhere here that addresses that.

Re: one piece in place of sliders
 

I dunno, I just know I have all 4 sliders and all four will swap on my 64 burb. I've stacked them up and compared them, and I've temporarily held the solids into the front holes-there seems to be slight differences in all the holes probably due to mass manufacturing-mine has some sloppy lines especially on the roof. Worst case scenario make templates and have the glass cut.

Re: one piece in place of sliders
 

Front and rear are not the same. I made patterns out of 1/8'' plywood to get my glass cut.

Re: one piece in place of sliders
 

That's where I saw it! Thanks Nobby. Until this past year I too thought they interchanged. See post #260 in Nobby's build:

http://67-72chevytrucks.com/vboard/s...489645&page=13

Re: one piece in place of sliders
 

Yup I made templates and the fronts and rears are definitely not the same. Even the gaskets are different.

thanks to everyone

Re: one piece in place of sliders
 

crazyhenry Not sure what you are referencing here? I only posted looking for information and I am a supporting member????????????

Re: one piece in place of sliders
 

That wasn't directed to you Lucifer, a moderator removed crazyhenry's original post (which IIRC, offered to sell some one piece glass, or something like that) and put in the text referring to this forum's rules.

Re: one piece in place of sliders
 

Any one have pictures of a finished suburban with no sliders?

Re: one piece in place of sliders
 

Just finishing mine
Attachment 1214994