Tuned Port Injected Roller Engine
 

305 TPI been in my truck for almost 20 years, has been in my c10 since 94, at the time of the install it was a fresh engine with 20k miles, has approx 75k now ,I have always changed the oil, recent work was powder coated all intake,front accy brackets and pulleys, ported the plenum and lower intake, new gaskets and seals on injection,relocated fuel lines to rear of engine, new plugs,ect

Included is all accy and all wiring and ecu

Runs perfect

400$

Re: Tuned Port Injected Roller Engine
 

What else does it need to install? Thanks

Re: Tuned Port Injected Roller Engine
 

nothing all wiring and sensors are here, was running 6 months ago, I have everything to make it run again

Re: Tuned Port Injected Roller Engine
 

worth a shot, I don't know if you would ship but if you would to 28387 there are a couple of terminals around here

thanks,
Steve
qksilver69@aol.com

Re: Tuned Port Injected Roller Engine
 

I can't ship this, I just don't have resources to move it

Re: Tuned Port Injected Roller Engine
 

no problem, I understand completely

Thanks,
Steve

Re: Tuned Port Injected Roller Engine
 

would you consider shipping everything but the long block? for a reduced price, I have a tbi long block engine that ran pretty good and would like to do the tpi swap.

I do mean everything else than the long block. All I have left of the TBI motor is a short block and heads.

Thanks,
Steve

let me know scjkovach@aol.com

Re: Tuned Port Injected Roller Engine
 

I may do that but I would have to get a bit more for taking it apart and you pay shipping

Re: Tuned Port Injected Roller Engine
 

it won't work , I appreciate your time. I can get a complete TPI set up locally for $200 but with out the accessory drive because everybody is converting to the ls motors.

I was hoping to get yours complete which would save me some time.

Thanks again, good luck on the sale
Steve