Frame cab mounts, xmembers, box mounts, spring hangers, etc
 

Here is a bunch of frame mounts and cross members that I cut off the last two 2wd trucks. These parts have been hot tanked and if wanted I will acid dip any of them at no cost. Must specify if wanted. Paypal no fees or MO. Plus shipping. Thanks, Tom

Pic 1 form a 70 chev/gmc C10 with leaf springs
front cross member 25.00
center cross member 40.00
cross member just forward of the rear end 40.00
cross member just behind rear end 25.00
spare tire support 12.50
very rear cross member 30.00
rear/rear spring mounts 25.00 each
front spring hangers 25.00 each
rear cab mounts 20.00 each
front cab mounts 20.00 each
core support mounts 10.00 each
box mounts total of 6 - 2 fronts, 2 centers, 2 rears 10.00 each
shock mount 15.00
sway bar mounts 8.00 each

Pic 2 from a 72 chev/GMC C20 with leaf springs
front cross member 25.00
center cross member 40.00
cross member just forward of rear end 40.00
spare tire support 12.50
rear cross member 30.00
rear/rear spring hangers 25.00 each
front spring hangers 25.00 each
rear cab mounts 20.00 each
front cab mounts 20.00 each
core support mounts 10.00 each
box mounts total of 6 10.00 each
shock mounts 15.00
sway bar mounts 8.00 each
e-brake cable mounts. 5.00 each
hyd brake line bracket 6.00
D60 bump stops 5.00 each

Re: Frame cab mounts, xmembers, box mounts, spring hangers, etc
 

Pm sent

Re: Frame cab mounts, xmembers, box mounts, spring hangers, etc
 

Any small block motor stands

Re: Frame cab mounts, xmembers, box mounts, spring hangers, etc
 

I'll take the sway bar mounts for the frame. Pm me paypal payment info please.
Mike

Re: Frame cab mounts, xmembers, box mounts, spring hangers, etc
 

1971 cheburban, Sure no problem. I have many sets of these done up. 25.00 tanked, dipped, media blasted, with bolts, and ready for paint. shipping 13.00

Cash3481 Mike, PM coming

Thanks, Tom

Re: Frame cab mounts, xmembers, box mounts, spring hangers, etc
 

Tom, did you decide if you wanted to sell me those brackets?

Re: Frame cab mounts, xmembers, box mounts, spring hangers, etc
 

any chance you have any really nice rear splash guards cleaned up for sale and will ship to Canada? Rod.

Re: Frame cab mounts, xmembers, box mounts, spring hangers, etc
 

13 hour back to back days at work busy busy. Yea I'll do that. You were coil spring right?
Yes, I just need to process them. They will go USPS. Let me get a shipping cost. PM me your shipping addy.

Thanks, Tom

Re: Frame cab mounts, xmembers, box mounts, spring hangers, etc
 

If you have anymore I'll take a set of small block perches.

Re: Frame cab mounts, xmembers, box mounts, spring hangers, etc
 

Originals were coil, if they all use the same holes though I'll take the leaf brackets, the trucks been converted to 4wd. Thanks

Re: Frame cab mounts, xmembers, box mounts, spring hangers, etc
 

I see you most every bracket known to a 67-72.

I'm looking for a carrier bearing mounting bracket, the one that mounts to the lower side of the cross member -- like first picture in this post: http://67-72chevytrucks.com/vboard/s...d.php?t=584787

Thanks,
Ken

Re: Frame cab mounts, xmembers, box mounts, spring hangers, etc
 

Yea I have lots of them. 25.00 for a set of take outs or dipped media, blasted and ready for paint. plus 12.00 shipping
Ok, I'll look at the leaf brackets and compare. let me look into the cross member brackets a bit deeper to be sure I'm getting you what you need.
I'll look. that is a very uncommon bracket.

Thanks, Tom

Re: Frame cab mounts, xmembers, box mounts, spring hangers, etc
 

What size is the front sway bar in the picture and how much shipped to 62027 with brackets. Thanks, Dave

Re: Frame cab mounts, xmembers, box mounts, spring hangers, etc
 

Sounds good Tom, just send pm when you get a chance.

Re: Frame cab mounts, xmembers, box mounts, spring hangers, etc
 

PM sent, I need a drivers side rear cab mount shipped to 08046.

88Ironduke

Re: Frame cab mounts, xmembers, box mounts, spring hangers, etc
 

I'll take the dipped, media blasted and ready for paint small block perches for $37 shipped. PM the payment info. Thank Tom

Re: Frame cab mounts, xmembers, box mounts, spring hangers, etc
 

Paypal sent for cab mount.

Thanks.
88Ironduke

Re: Frame cab mounts, xmembers, box mounts, spring hangers, etc
 

Paypal payment sent for small block perches, Thanks.

Re: Frame cab mounts, xmembers, box mounts, spring hangers, etc
 

Looking for some V8 motor stands,

Re: Frame cab mounts, xmembers, box mounts, spring hangers, etc
 

specks70, Sure 37.00 shipped on a pair. Read post 16 on this thread it would be same as that one.
We got hit hard with a snow storm followed up with a nice dose of freezing rain. I don't have power at home and may not till mid week. There trees on top of power lines everywhere and I live off the beaten path so I'm last on the list. I may be slow to respond. Thanks, Tom

Re: Frame cab mounts, xmembers, box mounts, spring hangers, etc
 

Great, PM me the payment information and I will get money sent out to you.
Sorry to hear about the weather issues.
Thanks Again, Really needed these perches.

Re: Frame cab mounts, xmembers, box mounts, spring hangers, etc
 

sorry, Some how I missed you. This is the standard bar. 50.00 for the complete set up plus shipping. If this one works for you let me know and I'll get shipping cost.
I have pics to post post to make sure we are on the same page. I can't post pics till I get power back on at home. Going on 5 days now without power!
PM sent
Thanks, They will ship Wednesday.
Your mount shipped today on USPS.

Thanks Guys, I'm still without power at home and online time is limited. Tom

Re: Frame cab mounts, xmembers, box mounts, spring hangers, etc
 

pics of cross member mount for Madtrucker. If your truck was originally coil spring this should be the correct bracket off the cross member. Thanks, Tom

Re: Frame cab mounts, xmembers, box mounts, spring hangers, etc
 

That's the one. I'll take them however you are willing to ship them. If you don't want to pop them off the x member I'll take the whole thing. Up to you and thanks.

Re: Frame cab mounts, xmembers, box mounts, spring hangers, etc
 

Thank you,
Received the motor perches today that I requested ...... Just perfect....... Thank you again. Tll74 is very trust worthy. Awesome.........