The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- The 1973 - 1987 Chevrolet & GMC Squarebody Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=4)

- - Oil preasure sending unit (https://67-72chevytrucks.com/vboard/showthread.php?t=61497)

maineiac

07-21-2003 09:38 AM

Oil preasure sending unit

OK here is a stupid question but can anyone tell me where the oil preasure sending unit is normally on a mid 80's 350? I have a 81 C10 with a (somewhere in the 80's) 350 and no sending unit I was thinking it is right above the oil filter but if that is it I am screwed as it is pluged. Anyway any help is apreciated.

Thanks
Steve:bowtie:

swervin ervin

07-21-2003 11:47 AM

Look beside the distributor, on the drivers side. There should be a brass tee and the sending unit, along with the pressure switch will be in it. The sending unit will be the biggest one, with a one wire terminal.

maineiac

07-21-2003 01:28 PM

Thanks Mike
I will check it out this afternoon when I go home.

Steve

All times are GMT -4. The time now is 07:30 AM.