The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1967 - 1972 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=3)
-   -   progress,questions and shave pics.. (https://67-72chevytrucks.com/vboard/showthread.php?t=61583)

special70gmc 07-21-2003 09:05 PM

progress,questions and shave pics..
 
1 Attachment(s)
i hated the side marker on my 70 so i got rid if them and couldnt be happier but my pass side door will just not line up properly it either doesnt close propperly or it closes and the lines are all wrong. does any body have any door lineing up advise?

o yeah i know the tires are just a little bit too big. also its 4/6 drop no engine/trans, what size tire should i run on it ?
thanks -kyle

special70gmc 07-21-2003 09:06 PM

1 Attachment(s)
another

special70gmc 07-21-2003 09:09 PM

1 Attachment(s)
maybe one of the new dash

bbchevy 07-21-2003 09:38 PM

i guess your truck is lookin better... i mean the last time i saw it was in photo class.... it seems to have come a long way. good job kyle. y dont you check out my truck? http://67- 72chevytrucks.com/vboard/showthread.php3?s=&threadid=59060&perpage=25&pagenumber=1




-Scott

bbchevy 07-21-2003 09:39 PM

grrr the link didnt work.... just go to 88-98 message board and go to "so you wanna know how much?" thats my truck. have fun and keep up the good work!

special70gmc 07-22-2003 07:47 AM

dammit scott........ i diddnt know you were a member here?

special70gmc 07-22-2003 08:24 AM

nobody knows any tips on aligning doors????????????????????????????????? ttt

raggedjim 07-22-2003 08:24 AM

Gonna be nice.. check your cab, if its not on there straight and level you'll never get the doors or fenders right.

Rg

Figment412 07-22-2003 11:28 AM

Well I really don't have tips, it took my dad and I about 2 hours of just tweaking to get it to line up ok. Do you have any fender spacers in?? I needed a few to get one of my doors to line up right.


All times are GMT -4. The time now is 08:01 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com