Parting out 72 blazer chassis
 

Decided to part out my 72 Frame I have. Its a complete 4x4 with fuel tank, filler neck, tank straps, driveshafts, 12 bolt rear axle, all the springs and hangers, cross members, all the brackets, rust free and straight frame. Let me know what you need. Willing to ship the shippable parts with a payment through paypal. It will take me a few days to strip any of the parts so please be patient. We all know that cutting and popping rivets is no fun and time consuming so be patient with me. I will sell complete but I am keeping the front axle. I could swap in a 10 bolt front if needed. Let me know what you need and I will help as best I can.

Re: Parting out 72 blazer chassis
 

I'm looking for a metal gas tank if in good condition, price on straps. Also does it have a skid plate cover?

Re: Parting out 72 blazer chassis
 

Pics
Sorry for the snow!

Re: Parting out 72 blazer chassis
 

Pics

Re: Parting out 72 blazer chassis
 

Pic

Re: Parting out 72 blazer chassis
 

I'm interested in:

1) Upper radiator to engine pipe
2) Pitman arm with bolt\nut
3) Exhaust manifolds
4) Transmission dip stick and tube (should be 34" long)
5) Transmission vacuum modulator hard line
6) Any other vacuum hard lines?

Can you post a couple of pics of the carburetor area showing top of engine.

Thanks
Jim

Re: Parting out 72 blazer chassis
 

I'm interested in the complete fuel filler assembly down to the tank if it is shippable. Please let me know via PM what you'd need for it shipped to 15205.

Re: Parting out 72 blazer chassis
 

I know I could do the manifolds and pitman arm. As far as the rest goes, the motor and trans was swapped at one time. I know that the dip stick is not correct and I would have to look to see about the vacuum lines. The engine is already committed to.

Re: Parting out 72 blazer chassis
 

Its shippable for sure. Ill PM a price

Re: Parting out 72 blazer chassis
 

I'm interested in the two rear bumper brackets and the transfer case skid plate, I don't need the crossmember.

Re: Parting out 72 blazer chassis
 

Is the OEM tie rod bracket for the steering dampner there? I'll get in line for the t-case skid plate. Thanks

Re: Parting out 72 blazer chassis
 

OK, PM me which items in my list are for sale, prices?

Thanks
Jim

Re: Parting out 72 blazer chassis
 

How much for the bare rolling chassis with swapped out 10 bolt front?

Re: Parting out 72 blazer chassis
 

Sent you a PM. Want to verify exactly what you're looking for.

Re: Parting out 72 blazer chassis
 

PM sent

Re: Parting out 72 blazer chassis
 

do you still have a front drive shaft??

Re: Parting out 72 blazer chassis
 

Awhile back you offered a filler neck in response to my thread titled WTB '71/72 Blazer Fuel Filler Neck http://67-72chevytrucks.com/vboard/s...d.php?t=615805 Is this filler neck still available? also interesed in the mounting hardware and cover from inside the bed.

Re: Parting out 72 blazer chassis
 

interested in the crossmember under the transfer case not the one that the trans adapter is bolted to but the one behind it.

Re: Parting out 72 blazer chassis
 

Can I get a price on the fuel tank, filler neck, and straps? I can pick it up locally. Thanks.

Re: Parting out 72 blazer chassis
 

OP has not posted here in over two weeks...

Re: Parting out 72 blazer chassis
 

For some reason this thread had not been showing up with any new content for me until today. Sorry guys. Let's see, I still have both driveshafts, the fuel tank and straps, steering box and pitman arm, transmission, transfer case and skid plate. 29od1 has committed to the chassis and all other brackets.

Re: Parting out 72 blazer chassis
 

I can check with 29od1 to see if he needs this. I will let you know.

Re: Parting out 72 blazer chassis
 

You could pick the tank and straps up on Saturday. PM me your number and we can discuss details.

Re: Parting out 72 blazer chassis
 

I can do the skid plate if you are interested

Re: Parting out 72 blazer chassis
 

I looked and I honestly don't know if its the factory bracket or not. I could send you a photo.