wheel question
 

i found these wheels from a 2004 2500 hd truck on CL and they are the same size and bolt pattern but i am not sure about the bore hole size compared to my original steel ones. will these wheels fit and does the stock lugs that come with them work as well?

Re: wheel question
 

Those wheels will work just fine. You'll need a conversion lug nut to use the caps though, you can find them on ebay. I used a hole saw on two of the caps to clear the hubs

Re: wheel question
 

so the factory lug nuts that came of his truck wont work?

Re: wheel question
 

No, the newer trucks use a metric thread.

Re: wheel question
 

thanks alot for the info. do you know what they call the lugs on ebay so i can make sure i get the right ones?

Re: wheel question
 

Re: wheel question
 

would it be the 9/16 to 7/8 conversion lug nut?

Re: wheel question
 

Here ya go:

http://www.ebay.com/itm/32-LUG-NUTS-...6284d8&vxp=mtr

Re: wheel question
 

sorry posted after you already did. thanks again for your help with this!

Re: wheel question
 

thanks to you as well trevor.

Re: wheel question
 

Haha, funny I didn't realize Adam had already. Same link even.

Re: wheel question
 

i havent picked the wheels up yet but i was told my wheels have a back space of 3 and these have a backspce of 5 and that it would moves my tires 2 inches inward and rub when i make turns.

Re: wheel question
 

they will fit fine, not sure what size tire you are going to use but I had 295's on mine and it would only rub occasionally at full lock turning right on the pitman arm.

http://i205.photobucket.com/albums/b.../Plowtruck.jpg

Re: wheel question
 

i currently have a new set of 235/85/16 on the stock wheels