The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- The 1973 - 1987 Chevrolet & GMC Squarebody Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=4)

- - Seat Swap (https://67-72chevytrucks.com/vboard/showthread.php?t=617460)

2772	02-20-2014 05:55 PM

Seat Swap

Found an 86 burb with buckets. Will those seats bolt directly to my 84 c10?

aggie91

02-20-2014 06:07 PM

Re: Seat Swap

I believe that there are some small brackets welded to the floor pan of the suburban that you will need to make the brackets bolt in. Other than that they should fit.

2772	02-20-2014 06:17 PM

Re: Seat Swap

Quote:

Originally Posted by aggie91 (Post 6535754)

I believe that there are some small brackets welded to the floor pan of the suburban that you will need to make the brackets bolt in. Other than that they should fit.

Oh hell. Welded? Sounds like a job and a half. I wonder how guys go about doing that?

Rich84

02-21-2014 09:04 AM

Re: Seat Swap

They come out pretty easy with a hammer and chisel..

RandyP

02-21-2014 09:35 AM

Re: Seat Swap

Most will bolt the brackets in once removed from the donor.

aggie91

02-21-2014 10:13 AM

Re: Seat Swap

Quote:

Originally Posted by 2772 (Post 6535764)

Oh hell. Welded? Sounds like a job and a half. I wonder how guys go about doing that?

They are just spot welded to the floor. Hammer and Chisel should get them off without much trouble..

motornut

02-21-2014 10:35 AM

Re: Seat Swap

Quote:

Originally Posted by aggie91 (Post 6536784)

They are just spot welded to the floor. Hammer and Chisel should get them off without much trouble..

yup easiest way,go around the piece,take out the floor

All times are GMT -4. The time now is 04:40 PM.