Cutting up Truck cab for
 

I have a local guy interested in some patch panels and so I am going to cut this cab up if anyone is needing patches.

Rockers, and cab corners are junk as well as supports and a little by the kick panels.
The rest isnt too bad.

I would rather not ship huge sections but if you have a way of shipping I would help look into it.

Re: Cutting up Truck cab for
 

How's the floor? Any rust holes?

Re: Cutting up Truck cab for
 

Floors got a few holes by the outer rocker edges and the kick panels. all the other sections of the floor are fine

Re: Cutting up Truck cab for
 

could you sell me about a 10 inch square around the windshield wiper motor. my is rusted out and I don't know any way to fix it besides cut out and replacing it

Re: Cutting up Truck cab for
 

Are you interested in selling the gas pedal assembly complete with trim and the rubber pads and trim for the clutch, brake and park brake? I'm a bit down the road from you south of Wichita. Thanks.

Re: Cutting up Truck cab for
 

Let's see if this works. Copied your photo and drew a box around the areas that I'm looking for. I numbered the boxes as well. They're pretty small sections I think. I could do without box number 3. Mainly looking for the areas for box 1 and 2. Let me know what you can do.

Re: Cutting up Truck cab for
 

ironhorse, yes i can id do $25 for everything if you want to pick it up whenever

gutsy, I included another photo if youd like to outline it thatd help me out.

lowandslow, do you just want exactly on the yellow lines? I can cut #3 but how far on the drivers side towards the kick panel would you need?

Re: Cutting up Truck cab for
 

afcamaro, before I commit totally I guess I need to ask, is the cab a '71 or '72 cab you are cutting up? Looks like it could be as I see the ECC lines on the passenger side of the gas tank. A '71/'72 gas pedal suspends freely from the firewall and is not attached to studs on the floor. Does that include the gas pedal complete too include the firewall bracket and bolts with the carb accelerator cable? Would you pull, box and ship to 67152 zip code? Would like to have the parts but Topeka is a bit of a travel for them. Let me know, not in a hurry for them, thanks.

Re: Cutting up Truck cab for
 

the picture isn't showing where i need. It is where the windsheild wiper motor sticks out and bolts to the arms that run the windsheild wipers. On the inside the wiper motor bolts to it , and I need it shipped to 50801 thanks.

Re: Cutting up Truck cab for
 

I'll look closer on my truck for how much I actually need in the morning and I'll let you know.

How much would you charge for box 1 and 2 shipped to 83634?

Re: Cutting up Truck cab for
 

whats the drivers pillar look like inside where the door meets it?

Re: Cutting up Truck cab for
 

ironhorse - Yes it is a '72 cab. And looks like $40 shipped. includes the brackets and throttle cable.

Lowand slow - #1 and 2 $50 shipped.

Sorry idk why i was thinking heater box not wiper. heres some photos so I can get a little more idea.

chevyguy, ive included a pic and if its what I think your talking about its in great shape.

Re: Cutting up Truck cab for
 

afcamaro, I'll take the accelerator pedal brackets, bolts, cable and trim along with the clutch, brake and park brake rubber pads with the trim pieces. $40 shipped is good if you can do a money order, I don't have a Paypal account. PM me with payment info if that is good for you. Thanks.

Re: Cutting up Truck cab for
 

pm sent

Re: Cutting up Truck cab for
 

yeah looks pretty good... could you check behind weather strip for rust? how much for that shipped to 32226?

Re: Cutting up Truck cab for
 

U want the whole pillar? How far down? And just the drivers?

Re: Cutting up Truck cab for
 

My truck was in an accident a long time ago and the steering column is a little crooked now. It appears that the bracket that holds the column under the dash is whats bent. How much do you want for that bracket?

Re: Cutting up Truck cab for
 

There is two brackets underneath. one is round and the other is kinda flat piece of steel. Id do $15 shipped for both of them.

Re: Cutting up Truck cab for
 

hello yes the part the windsheild wiper motor screws to clear thur firewall. please send the three screws and rubber washers also. my truck is rusted there under the cowl and my motor flops up and down when i hit a bump thank you.

Re: Cutting up Truck cab for
 

Ok and how far of radius you want it around the wiper motor? 5 inches around each side? $35 shipped

Re: Cutting up Truck cab for
 

yes 10 inches around should work how do I pay you I have paypal if thats ok thanks.

Re: Cutting up Truck cab for
 

that works, my paypal is sweet1967camaro@yahoo.com if you can send as a gift thatd be great

Re: Cutting up Truck cab for
 

Do you have a cargo light wiring harness?

Re: Cutting up Truck cab for
 

I do have the cargo harness, I like to sell that complete with the cargo light etc for $35 shipped

Re: Cutting up Truck cab for
 

driver only...
Down to below the top door hinge?