The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The pre 1947 Chevrolet & GMC Truck Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=202)
-   -   46 Door support?? (https://67-72chevytrucks.com/vboard/showthread.php?t=618105)

solidaxel 02-25-2014 11:52 AM

46 Door support??
 
The cross bar that is in the middle of the46 door has some hard foam looking filler to support the door skin, this needs to be replaced, what did you folks use to replace it with???

tires2burn 03-18-2014 12:57 AM

Re: 46 Door support??
 
Clean out the old foam and try to wipe with scotchbrite between the bar and door skin. Get a 2 part epoxy foam from a body & paint store called anti flutter foam. It will mix in the tube as you squeeze the gun and it will expand & fill the gap without pushing the door skin out. The foam in the rattle cans will push the sheet metal out and you won't be happy. Put a silver dollar size spot about every few inches and that will support the skin just fine.

solidaxel 03-18-2014 09:38 AM

Re: 46 Door support??
 
Anti-flutter foam, I will pick up some today
Thank You !!

solidaxel 03-18-2014 11:30 PM

Re: 46 Door support??
 
I went to two paint supply stores this AM and all I could find was a 3M product called
"Ridged Pillar Foam" Two part epoxy, and it was like $45, and it said the expansion was 10X is that the material you were referring to?

tires2burn 03-19-2014 12:23 AM

Re: 46 Door support??
 
I went to Terrys auto supply on the net and copied this. Its what you want. Your local shop should have it. This is used for roof skins, hood braces, anywhere you need to stop the flutter. It does not get hard as a rock & that's what you need.


3M™ NVH Dampening Material, 50 mL, 34274


Stock Number: 60455052450



Ideal 2-part urethane product for replacing factory NVH (Noise, Vibration & Harshness) sealants and foams. Can be used for large installations. Remains very soft, yet sturdy and will not degrade. 60 minute work time.

Product Description


•A high performance two component urethane adhesive.
•Replaces factory-applied NVH (Noise, Vibration & Harshness) sealants and foams. Remains very soft, yet sturdy and will not degrade.
•Use with 08190 Performance Manual Applicator and 38191 Static Mixing Nozzle.


Part #: 3M.34274




Price and Units

Units: EACH

Units: EACH
Weight: 0.50 lbs.


List Price:
$24.98 / EACH

Your Price:
$22.48 / EACH

Product Links:
MSDS


Add to your cart

Quantity

solidaxel 03-19-2014 09:00 AM

Re: 46 Door support??
 
Thank You for the help.

solidaxel 04-03-2014 07:24 PM

Re: 46 Door support??
 
Thanks I found some on Amazon and bought three tubes!


All times are GMT -4. The time now is 10:28 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com