WTB: 4WD Exhaust Manifolds
 

Looking for a pair of the OE center/straight dump manifolds for a SB 4WD. Left and Right are the same.

Re: WTB: 4WD Exhaust Manifolds
 

TTT
I need a set as well.:lol:
Lawest,are you having as much trouble as me finding a set. ?
I hope you find them.

Tom

Re: WTB: 4WD Exhaust Manifolds
 

Hey guys, You may want to contact tll74 he is on the board. I am getting a set of angle back ones from him. You may also want to try ebay. type in Chevrolet exhaust manifolds, then on left column click used, then chevrolet. There are several. Be careful, some have bosses for alternator brackets, others have holes for the A.I.R. emission tubes. If you are doing a custom build, look for Corvette 2 1/2" ones. Our trucks come standard with 2". You may have to buy one at a time to get better pricing and watch out for shipping prices. There is one add for a manifold for $15 but the shipping is $57.50!!! "Buyer beware" Good luck!

Re: WTB: 4WD Exhaust Manifolds
 

I have a nice one. Pm me a cell # or e mail and ill send you pics

Re: WTB: 4WD Exhaust Manifolds
 

I have aftermarket set from oreillys. Both sides only used for about 500 mikes then converted to a 2wd.

Re: WTB: 4WD Exhaust Manifolds
 

Like these type?

Re: WTB: 4WD Exhaust Manifolds
 

PM sent

Re: WTB: 4WD Exhaust Manifolds
 

Thanks 72Junky, I am watching some on ebay now.

Re: WTB: 4WD Exhaust Manifolds
 

PM sent

Re: WTB: 4WD Exhaust Manifolds
 

Your welcome Lawest,
If you don't find what you are needing here, try ebay search "center dump", "ram horn", and "sbc". The straight drops are a lot more common than the 2wd angle back manifolds. Local swap meets are another option, if you have time. I was seriously considering the 2 1/2" 'vette ones for my build, but, I have a nearly new dual exhaust that would need replacing if I went that route, it's only 2". Mo $, Mo $, Mo $... Good luck!

Re: WTB: 4WD Exhaust Manifolds
 

Here is what I ended up with:
Attachment 1241731
Thanks to 72Junky I found a set on ebay for just over a $100 shipped. Then I spent $150 to have them ceramic coated. Should hold up and look good.

Re: WTB: 4WD Exhaust Manifolds
 

What brand are those? They look nice but longer and larger diameter than original. curious to hear how they fit and work.