The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1967-1972 Chevrolet & GMC Pickups Parts Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=8)
-   -   TN Looking for a license plate light connector for a '67 GMC (https://67-72chevytrucks.com/vboard/showthread.php?t=619296)

jabborabbo 03-05-2014 12:55 AM

Looking for a license plate light connector for a '67 GMC
 
2 Attachment(s)
All-

I need the male end of the wire connector (specifically the one shown in the second picture below)...I'd be more than happy to consider the complete male/female connector, and/or the complete wire lead, and/or maybe the complete assembly....

Thanks in advance!

davischevy 03-05-2014 03:50 PM

Re: Looking for a license plate light connector for a '67 GMC
 
I could be wrong (Highly unlikely, HA) but I think any GM vehicle of that era will have the piece you are looking for.

LockDoc 03-07-2014 04:59 PM

Re: Looking for a license plate light connector for a '67 GMC
 
-
I found two of the female half but none of the male ends. I think the reverse lights use the same plugs. The only difference is the wire color.

LockDoc

jabborabbo 03-07-2014 05:38 PM

Re: Looking for a license plate light connector for a '67 GMC
 
Quote:

Originally Posted by LockDoc (Post 6562888)
-
I found two of the female half but none of the male ends. I think the reverse lights use the same plugs. The only difference is the wire color.

LockDoc

If you have the male reverse light plug I'll take it...color isn't important!

LockDoc 03-07-2014 11:36 PM

Re: Looking for a license plate light connector for a '67 GMC
 
Quote:

Originally Posted by jabborabbo (Post 6562940)
If you have the male reverse light plug I'll take it...color isn't important!

-
I have a bed out there I am going to scrap that should still have the reverse light buckets in it. Only problem is that it is buried in a large snow drift. It is supposed to be 50-60 degrees Monday and Tuesday so maybe the snow will melt enough that I can check it out.

LockDoc

jabborabbo 03-08-2014 12:12 AM

Re: Looking for a license plate light connector for a '67 GMC
 
Quote:

Originally Posted by LockDoc (Post 6563493)
-
I have a bed out there I am going to scrap that should still have the reverse light buckets in it. Only problem is that it is buried in a large snow drift. It is supposed to be 50-60 degrees Monday and Tuesday so maybe the snow will melt enough that I can check it out.

LockDoc

That will be fine, sir!

LockDoc 03-12-2014 10:48 PM

Re: Looking for a license plate light connector for a '67 GMC
 
Quote:

Originally Posted by jabborabbo (Post 6563557)
That will be fine, sir!

OK, the snow finally melted enough that I could pull one of the reverse light housings out and the connectors are the same as the license plate light plug. PM me your info and I will send it to you free of charge.

LockDoc

jabborabbo 03-12-2014 10:54 PM

Re: Looking for a license plate light connector for a '67 GMC
 
Quote:

Originally Posted by LockDoc (Post 6572468)
OK, the snow finally melted enough that I could pull one of the reverse light housings out and the connectors are the same as the license plate light plug. PM me your info and I will send it to you free of charge.

LockDoc

You, Sir, are a credit...nay, an absolute blessing to this board and community!!!

Thank you! PM inbound!


All times are GMT -4. The time now is 11:16 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com