Need help .. Power window connector
 

Hello,

I need your help please to find new connector and wiring for driver power window switch for my truck 1979 .. If some one know gm parts number, it will help more.

http://www.m5zn.com/newuploads/2014/...79d2d68cb4.jpg

Thanks

Re: Need help .. Power window connector
 

I am not sure of the GM P/N, but would this one work for you?

http://www.classicparts.com/1977-81-...tinfo/55-616/#

I re-wired the connectors in my power locks/windows last summer but only had to replace the terminal connectors rather than the entire "socket".

Re: Need help .. Power window connector
 

pic

Re: Need help .. Power window connector
 

If the ends on your wires are what is bad, Oreillys can get the new crimp on ends if you take an old end in so they can identify it in the books.
I have done this several times.

Re: Need help .. Power window connector
 

I have seen a link posted on here to the wire pig tail for sale. Not sure what to search for to find it now.

Re: Need help .. Power window connector
 

I would be interested too if there is somewhere to buy the entire pigtail. If I remember right the driver side unplugs in the kick panel and the passenger si
de under the dash.

Re: Need help .. Power window connector
 

Here is a link to the AC Delco pigtail and harness catalog.

http://acdelcotechconnect.com/pi/wir...cavity/female/

You check the box on the upper left of the screen for the number of "cavaties" or contacts on your connector and you will see pictures of the parts available with the AD Delco part number. The connector/harness you want is PT254. Check oewarehouse.com and oehq.com and you should find it. I paid about $24 at oewarehouse.com.

Here is my saga on getting the harness and installing it. Be advised that this Delco part is not color coded, so you have to pay attention to what wire goes where on the old one. You need to furnish your own 10 ga spade connectors or equivalent.

http://67-72chevytrucks.com/vboard/s...window+harness

These connectors were designed so the wires bend at a 90 degree angle behind the connector, which puts stress on the wire/connector when they are pushed back into the door, causing breaks.

Re: Need help .. Power window connector
 

Thanks for all and still looking for terminal connector

Re: Need help .. Power window connector
 

Delete