Blower motor/heator core assebly
 

I pulled the Blower motor and AC parts off last night, I'll be pulling the heater core housing and parts off tonight. Here are some pictures of blower motor. Working condition is unknown. I got this truck Non/running and I'm not sure f the motor even spins. I'll let the hole set go for $200 plus shipping. I'm not really sure what this hole setup is worth. Make me an offer and it may go down. I don't need these parts, I'm going with the Vintage Air setup. Let me know if you need anything else in this setup. I may have it.

Attachment 1226304

Attachment 1226305

Re: Blower motor/heator core assebly
 

Is my price to high?

Re: Blower motor/heator core assebly
 

Ok. Scrap the first post price. Let's go for $75 plus shipping. Just another part I need out!

Re: Blower motor/heator core assebly
 

ttt

Re: Blower motor/heator core assebly
 

is there a cover that goes over that box, my dad is looking for stuff to put ac back in his project? and do you have any other ac parts. we need everything ac/heater wise

Re: Blower motor/heator core assebly
 

Cover? I'm not sure exactly what you are asking.

Re: Blower motor/heator core assebly
 

im not sure either haha, my dad is looking for parts to finish his pickup im guessing he meant there's a housing goes over the box assembly so you cant see the hoses and stuff, ill ask him when he gets back. but in the meantime do you have any other parts for ac, he needs a complete system other that the controls inside the cab.

Re: Blower motor/heator core assebly
 

The AC box is three pieces - the two you picture above and then the distribution box with the T pipe and the defrost part, all of that. Unless you're just replacing a few parts, not sure how useful it all is without the complete box setup.

But to answer the cover, no, it's all out there in all it's glory. Here's what it roughly looks like cleaned up.

Re: Blower motor/heator core assebly
 

Thank you that was a helpful post.

Re: Blower motor/heator core assebly
 

Now I understand what you looking for! It would have been nice if GM had built such thing.

I also have all the In cab pieces too. I can sell all of them if you are interested.

Re: Blower motor/heator core assebly
 

Do you still have this available?

Re: Blower motor/heator core assebly
 

It is still available.