The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- The 1960 - 1966 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=6)

- - 66 driveshaft (https://67-72chevytrucks.com/vboard/showthread.php?t=620323)

bluechevy66

03-12-2014 08:40 AM

66 driveshaft

Does anyone know if a driveshaft from a 69 longbed with a 350 motor and tranny will bolt right in with no mods to a 66 longbed with a 350 and th350? It's a double shaft with carrier barring. Thinking about just going with single driveshaft

Captainfab

03-12-2014 11:59 PM

Re: 66 driveshaft

If the '69 is an original small block truck with the engine in the original forward position, the driveshaft will be too long. It really is not expensive to have a driveshaft shortened. I would stay with a 2 piece driveshaft on a longbed......others will disagree though.

All times are GMT -4. The time now is 12:30 AM.