The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- The 1973 - 1991 Blazers, Jimmys, and Suburbans Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=37)

- - Where to find: SEAT BELT SHOULDER BOLT (https://67-72chevytrucks.com/vboard/showthread.php?t=620744)

swissarmychainsaw

03-15-2014 03:57 PM

Where to find: SEAT BELT SHOULDER BOLT

I'm trying to add shoulder belts to my 73 Suburban (front and rear).

I found a set of the Shoulder (pivot) bolts that go into the B-Pillar, but for the life of me I can't find them new anywhere.

I'm hesitant to just buy a bolt from the hardware store since these are kind of specialty and the hardened versions are not quite the same from the local ACE.

Juliano's sells this bolt but it's a 3/16" Fine thread, and mine is more like
a 1/2 Coarse.

http://www.parts123.com/parts123/yb....~Z5Z5Z5~Z5Z5Z5

Where do I find this?

Thanks!
SEAT BELT SHOULDER BOLT

68Timber

03-15-2014 08:19 PM

Re: Where to find: SEAT BELT SHOULDER BOLT

You found a used set? Why not run them?

swissarmychainsaw

03-15-2014 08:45 PM

Re: Where to find: SEAT BELT SHOULDER BOLT

Quote:

Originally Posted by BRUISER (Post 6577063)

You found a used set? Why not run them?

I found 2 but need two more for the other side!

Trying to get 4 proper shoulder belts in the beast!

68Timber

03-15-2014 09:40 PM

Re: Where to find: SEAT BELT SHOULDER BOLT

There are so many trucks being parted out the 73-87 classified section, you should be able to get two more cheap if your local junk yards are bare.

All times are GMT -4. The time now is 01:03 PM.