1967 Upper control-arm/a-arm mounting bracket
 

I'm trying to find a few parts for my 67 C10, but I need the forum knowledge-base to chime in if possible.

One part I'm after is the L shaped mounting bracket that mounts to the frame, that the upper control-arm/a-arm shaft mounts to.

What I need to know is a) are these the same from 67-72? and b) are there differences between 2wd, 4wd, etc?

This is a part I have to buy used (LMC make the 73+ version, but not this), and will be placing a wanted ad on the forum, so I need to make sure they come form the correct vehicle before doing so

Here's some pics for those unsure what I'm referring to:

The piece circled:

http://i33.photobucket.com/albums/d9...3.jpg~original

http://i33.photobucket.com/albums/d9...2.jpg~original

http://i33.photobucket.com/albums/d9...1.jpg~original


Thanks for your time.

Cheers,
Russ

Re: 1967 Upper control-arm/a-arm mounting bracket
 

junkyard or find someone parting out a truck would be your best bet. Post on the classifieds here looking for it