How do these come off
 

Anyone know how these deelywhackers come off of the fender. I quickly looked but don't know how the clips come off.

Re: How do these come off
 

If your talking about the rubber deelywhackers, there stapled on mine.

Re: How do these come off
 

The metal things the rubber is stapled to.

Re: How do these come off
 

you gotta get a flathead in between the little clip not the clip and metal piece the clip looks like two small pieces of square chunks and spread it and in turn it makes the clip smaller on the backside then pull it out its about 5 or so

Re: How do these come off
 

I think these photos show the subject in question. Small metal clips go thru the holes of the metal strip and hold it onto the fender brace. You can see the matching holes in these photos.

The last photo shows one of the clips (badly rusted) on the right before removal.

Re: How do these come off
 

Ok, got them off, thanks Pimpston, now how do the braces come off, looks like they are under the fender folds and maybe spot welded.

Re: How do these come off
 

Yep they are. If you are replacing the lower part of the fender cut off the fender from the inter bracing.

Re: How do these come off
 

if the bottom of your braces are rusted i would only replace what is rusted. the spot welds up toward the top are a pita. cut the brace the length you need and weld back in. if somebody has an easy way to remove the whole brace, please chime in. if just the finder do what cru-zn said.