The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   LSx Swaps (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=206)
-   -   Power Steering Hose (https://67-72chevytrucks.com/vboard/showthread.php?t=621962)

lutronjim 03-23-2014 03:46 PM

Power Steering Hose
 
What power steering hose is available to connect new pump to old gear box? I know the threads are differ on each end.

Thanks

truckdude239 03-23-2014 04:40 PM

Re: Power Steering Hose
 
what year truck?


on my 71 c-10 i swaped the 1 inch fitting in the back of the new pump from a pump of the same year as the my truck and used the stock hose, the fitting cost my 72 cents at the local junk yard and since i can use the stock hose i can get one at any store if it ever goes out

First c10 03-24-2014 12:52 AM

Re: Power Steering Hose
 
I had replaced my original pump with an Oreillys pump before the swap. The replacement pump had the correct fitting on the pump I just transferred the fitting and lines to the lsx pump. Fit like a glove. Maybe you can check to see if your pump had been replaced and has the fitting already. Keep us posted
Good luck.

lutronjim 03-24-2014 10:34 AM

Re: Power Steering Hose
 
Thanks Never had a pump apart. Pushing 300k on a project engine I got from a buddy. Does the high pressure fitting unscrew to remove tank? If so I suppose I could just swap fittings from my pump to new one.

Going to swap in a Chevolet performance 'connect and cruise' package.

I an going to get the Vintage Air Gen IV system and their LS FrontRunner™ Drive System. This put compressor high and avoid frame mods.

lutronjim 03-24-2014 10:35 AM

Re: Power Steering Hose
 
Forgot to answer. Its a 70 side side short bed.

truckdude239 03-24-2014 03:22 PM

Re: Power Steering Hose
 
Yup the high pressure fittings will swap

Andy4639 03-24-2014 04:06 PM

Re: Power Steering Hose
 
The fitting on the backside of pump will unscrew and screw right back inside the new pump. At least thats how I and Hawks did it. It's spring loaded so be carefull when taking it a part. I thought I had lost part of it and looked all over the floor for parts. Finally realized it didn't. ;):chevy:

crazy longhorn 03-24-2014 07:15 PM

Re: Power Steering Hose
 
I run an 84 Burb box on my old ride (metric/o ring fittings)....the stock 2000 GMC hose fit the mess, on my old 69 with just a 'tweek" on the return line on the pump ;) You really have to love some of the mix/match on parts over the yrs! Longhorn

ls1nova71 03-24-2014 09:59 PM

Re: Power Steering Hose
 
You'll need to do some research, but I don't think the VA frontrunner system comes with a truck style power steering pump, I believe they use an F body type pump, in which case you can't swap out that fitting.


All times are GMT -4. The time now is 08:36 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com