wtb a set of clearence light lenses
 

A friend of mine is building a truck and wants to add clearance lights to it. Its a 72 and I have all the hardware and wire loom etc but no lenses. Anyone have a set of 5?
Thanks
Tim

Re: wtb a set of clearence light lenses
 

I should have some but let me check to see if I have 5 of them.

Re: wtb a set of clearence light lenses
 

Ok thanks let me know
Tim

Re: wtb a set of clearence light lenses
 

If Roger doesn't have them this is the best price on the net that I have found on new. http://www.ryderfleetproducts.com/si...3a-p-w71-9069a

Just a suggestion but if adding the factory style cab lights on a non equipped cab I would use the 1313a light assembly, it looks factory and uses the correct factory lens but the sealing gasket allows for a much smaller hole in the cab, the light fixture is above the rubber gasket instead of below like original and uses a smaller guage wire. You can also get LED bulbs to fit this style and really drop your amperage, it's much easier to run you own harness thru than the factory one...I've done it both ways and the 1313a saves a lot of time and trouble.

Re: wtb a set of clearence light lenses
 

Thanks for the info and ill check that out for him
Tim

Re: wtb a set of clearence light lenses
 

Tim, Rob linked the site I was telling you about.

Re: wtb a set of clearence light lenses
 

I have a GM set of 5. Price is $15.00 each. I also have a GM set of rubber pads that go under the lense for $5.00 each. Let me know if interested.

Thanks Roger

Re: wtb a set of clearence light lenses
 

http://i781.photobucket.com/albums/y...psdb29cb52.jpg
i have 3 new ones part # 9069a made in the usa bought @ napa years ago will take $30.00 shipped for them.