The 1947 - Present Chevrolet & GMC Truck Message Board Network - i'm looking for a 3speed manual tranny/fluid clutch for a 62.1/2 ton truck

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- The 1960-1966 Chevrolet & GMC Pickups Parts Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=7)

- - i'm looking for a 3speed manual tranny/fluid clutch for a 62.1/2 ton truck (https://67-72chevytrucks.com/vboard/showthread.php?t=62300)

truckman32

07-27-2003 10:33 AM

i'm looking for a 3speed manual tranny/fluid clutch for a 62.1/2 ton truck

1 Attachment(s)

help!!!i'm looking for a 3speed manual tranny my 62 truck has the fluid set up on the firewall so i'm guessing that not just any tranny will work?here is a picture

Demmit_Hemmit's 65

07-27-2003 03:58 PM

HEY TRUCKMAN..................WHAT YOU HAVE THERE IS A HYDROLIC CLUTCH..............THAT RUNS A SLAVE CYLINDER WHICH OPERATES THE CLUTCH................ANY THREE SPEED TRANNY WOULD WORK AS LONG AS YOU USE THE SAME MASTER CYLINDER

truckman32

07-28-2003 10:23 AM

thanks for the info hemmit

phos	08-09-2003 04:31 PM

I have a friend with a saginaw 3 speed out of a '74 camaro. Don't know what he is asking. You can contact him at k-granahan@ti.com

BIGG BELLY

08-18-2003 09:38 PM

i have the original 3-spd out of my 55' it was rebuilt about 1500 miles before it was swapped out for a 350 auto--don't know the the model or manufacturer, but i do have everything-tranny,slip yoke,bell housing,clutch,flywheel,and column shift linkage--

would like to get $150 for all of it

All times are GMT -4. The time now is 10:55 AM.