The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1973 - 1987 Chevrolet & GMC Squarebody Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=4)
-   -   wiper motor connectors (https://67-72chevytrucks.com/vboard/showthread.php?t=623165)

MB84C10 03-31-2014 06:56 PM

wiper motor connectors
 
Does anyone know where I could find some wiper motor pigtail connectors for my 84? I forgot to cut them off the old harness before I chucked it last year.. I've done all the looking through local parts stores ect.. didn't know if anyone knew a website that might have them??

hatzie 03-31-2014 07:36 PM

Re: wiper motor connectors
 
These trucks use Delphi Packard 56 series female terminals and shells on the wiper motor. Most of the GM cars and trucks in that era use these on the wiper motors. Many of these Delphi Packard 56 shells are obsolete but new 12033824 & 2962572 W-Crimp female terminals are available.

Connector part #s from the 1983 & 1985 wiring diagrams ( I don't have the 84 diagrams )

83 & 85
8917546 2 position conn park switch
8917544 3 position conn wiper motor

1983 washer
12004622 2 position conn wash solenoid

1985 washer
297378 2 position conn washer motor

MB84C10 03-31-2014 08:02 PM

Re: wiper motor connectors
 
Yea I can get the terminals no problem but def need connectors looks like might jist have to go dig through someone's junk pile somewhere most these trucks have been scrapped up here..

ray_mcavoy 03-31-2014 08:02 PM

Re: wiper motor connectors
 
Quote:

Originally Posted by hatzie (Post 6605098)
These trucks use Delphi Packard 56 series female terminals and shells on the wiper motor.

That's true for a lot of GM wiper motors (including 77 & older trucks). But I think the permanent magnet wiper motors on 78-up trucks use Pack-Con II (instead of 56 series) connectors. I'd have to go look at one to be sure though.

hatzie 03-31-2014 11:28 PM

Re: wiper motor connectors
 
Quote:

Originally Posted by ray_mcavoy (Post 6605144)
That's true for a lot of GM wiper motors (including 77 & older trucks). But I think the permanent magnet wiper motors on 78-up trucks use Pack-Con II (instead of 56 series) connectors. I'd have to go look at one to be sure though.

Could be.
I found one of the four Delphi connector shell part #s I listed. It's a Packard 56 series.
That doesn't mean the rest are not Pak-Con IIs... The terminals are definitely available. I just got finished installing 2 brand new Pak-Con ganged ATC fuse blocks on my Polaris ATV.

ray_mcavoy 04-01-2014 06:22 PM

Re: wiper motor connectors
 
Quote:

Originally Posted by hatzie (Post 6605579)
I found one of the four Delphi connector shell part #s I listed. It's a Packard 56 series.

That must be the #297378 connector for the 85-up washer pump motor that's 56 series.

These connectors (on an 84) all look like Pack-Con II to me:
http://i175.photobucket.com/albums/w...psaf956b98.jpg

Quote:

Originally Posted by MB84C10 (Post 6605143)
Yea I can get the terminals no problem but def need connectors looks like might jist have to go dig through someone's junk pile somewhere most these trucks have been scrapped up here..

I see you're in Maine too ... if you're not too far away from Sherman, there is a small junkyard here in town that still has a couple of these trucks.

hatzie 04-03-2014 10:47 AM

Re: wiper motor connectors
 
Quote:

Originally Posted by ray_mcavoy (Post 6606735)
That must be the #297378 connector for the 85-up washer pump motor that's 56 series.

These connectors (on an 84) all look like Pack-Con II to me:

Yes 297378 is still available too.
Look like Pak-Con II to Me too :D GM used a lot of those along with the Packard 56 & 59 series.
I never looked closely at my 85 wiper motor just the washer pump. When I searched the 83 motor connector part #s they didn't come up at all so I was unable to verify what they were.

According to the wiring diagrams the washer pump changes in 85 to a Packard 56 series.

73-77 are definitely Packard 56 connectors. The shells are still available.

The two motor connectors are the same part # from 78-91 and the washer from 78-84. Gives you a pretty decent selection of the more common chassis to yank em from...


All times are GMT -4. The time now is 08:08 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com