parting a 72 1/2 2wd chevy
 

Not a whole lot but if you see anything ask and I will price
3.08 rearend $125 no ship
disc brake frontend $75, no ship
body is rough, drivers door is decent $40, no ship
drivers fender is decent $40 no ship
Thanks Randy

Re: parting a 72 1/2 2wd chevy
 

some of it parted

Re: parting a 72 1/2 2wd chevy
 

Cond of the rear tail light harness cuts/splices price thanks.

Re: parting a 72 1/2 2wd chevy
 

Steering wheel? is it gold metalflake?

Re: parting a 72 1/2 2wd chevy
 

Rear view mirror condition?

Re: parting a 72 1/2 2wd chevy
 

Reeds72, I'll check it out but I wold think its spliced, all other wiring has been so far

Scott, yes its gold metalflake. No center cap. $20 plus shipping

twouvakind, I'll check it out Thurs

Thanks Randy

Re: parting a 72 1/2 2wd chevy
 

Randy,
I could that alt adjusting bracket, is it still available??
mike

Re: parting a 72 1/2 2wd chevy
 

sorry my mind is going faster than my fingers, what I wanted is, do you still have the bracket?

Re: parting a 72 1/2 2wd chevy
 

I would have a interest in swp pulleys and alternator brackets. Are pulleys single groove? Shipped to 15601. Thanks much, Bob

Re: parting a 72 1/2 2wd chevy
 

Randy - Ill get in line for the steering wheel if scott passes. Have a project itd be perfect for if its not chewed up

Re: parting a 72 1/2 2wd chevy
 

Mike, upper bracket is cracked needs welded

TallBob, I'll check them out

Adam, I have to get a quote for Scott, I will let you know

Thanks Randy

Re: parting a 72 1/2 2wd chevy
 

TallBob, both single groove

Re: parting a 72 1/2 2wd chevy
 

ScottH,

Re: parting a 72 1/2 2wd chevy
 

twouvakind, mirror is foggy

Reeds72, wiring is hacked

Thanks Randy

Re: parting a 72 1/2 2wd chevy
 

Hi Randy,

Is there a good accelerator bracket on the motor. Needing a trans kickdown and accelerator

Thanks

Re: parting a 72 1/2 2wd chevy
 

Randy,
Those pulleys should be fine for my needs. As I am looking at your pic that you posted....those are for swp application correct? How about alternator brackets? I am ok with doing repair on upper bracket if it needs welded? What do you feel you would need for those four items shipped to Greensburg,Pa 15601? Thanks much, Bob

Re: parting a 72 1/2 2wd chevy
 

Rad support any good and would you ship to 29678?
Also passenger front wheel well?

Re: parting a 72 1/2 2wd chevy
 

hi Randy.
I'd be interested in that drivers door. I can do cash up front if long term storage is possible...(late summer)
I was going also to ask about a longhorn bed you had a while back....

Re: parting a 72 1/2 2wd chevy
 

Timsrides, so your needing the throttle cable bracket? Sorry none of those right now, I sell them with gas pedal setups. I have the kickdown cable not sure about the bracket. but I have 2 71 chevys bought I will be parting soon

tallbob, these are correct for sb. For these 2 and the alt brackets $25 plus $13 shipping and fees, $38 total

clemsonchevy, sorry these are rusty

nobolt, this door is driver quality at best, speaker hole, bad regs, little rust in front corner, and upper hinge are is cracked

As I said above I have 2 other trucks bought, I will try to get them home this weekend and start threads on them soon

Thanks Randy

Re: parting a 72 1/2 2wd chevy
 

thanks Randy but i'll pass on the door.
something will come along before I need it.
how are you fixed for LHorn beds? do you still have that red one?

Re: parting a 72 1/2 2wd chevy
 

would you happen to have an under bed spare tire holder
I have a 1/2 ton 2wd.
If so how much shipped to 60410.

Re: parting a 72 1/2 2wd chevy
 

Hi Randy, I'm interested in the front coils, the windshield, the trim rings in good shape, the headers if they're in decent shape, the brake proportioning valve if you still have it, and the HEI distributor if its in decent shape...Thanks, ~Michael~

Re: parting a 72 1/2 2wd chevy
 

Dave, no problem

xman, sorry none right now

Michael, I sell the frontends complete, sorry. $80 for windshield. I need to look at the trim rings. Pro valve $10. HEI $10

Thanks Randy

Re: parting a 72 1/2 2wd chevy
 

Is the disc break front end still for sale?

Re: parting a 72 1/2 2wd chevy
 

I am interested in the rear end also. A dumb question for ya but they are 5 lug correct.