The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1967-1972 Chevrolet & GMC Pickups Parts Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=8)
-   -   MO 2 truck tilts, one original, one re-done (https://67-72chevytrucks.com/vboard/showthread.php?t=623668)

ls1nova71 04-04-2014 04:36 PM

2 truck tilts, one original, one re-done
 
5 Attachment(s)
I'm trying to raise some cash for my Blazer build, so I'm selling these two tilts. The first one is straight out of a truck. I've had it for years and was keeping it for a future project, but I have gotten several others so some can go. It's really tight and the shifter pin hole is nice. It looks to have been painted a long time ago, but could use a freshening up. The shift lever chrome is worn off in an odd spot, and it could also probably use to be lubed, as it doesn't snap up fast when the release lever is pulled, it does go up all the way, just a little slow as if it's a touch dry inside. The shaft spins nice and the wiring is all intact with nothing cut. I am including a new shift pointer with this column. $275 plus shipping.

ls1nova71 04-04-2014 04:39 PM

Re: 2 truck tilts, one original, one re-done
 
4 Attachment(s)
More pics.

ls1nova71 04-04-2014 04:47 PM

Re: 2 truck tilts, one original, one re-done
 
5 Attachment(s)
The next one is the nice one. This tilt has been completely disassembled cleaned up, painted all bearings checked and lubed and reassembled. It has a new turn signal switch. The levers are nice originals. It has a short shifter that most people prefer when using a smaller steering wheel. I have a long one, but the chrome is not very good on it. There is no play in this column. $425 plus shipping. I can take pictures of any part that isn't shown in these pics, just ask.

ls1nova71 04-04-2014 04:49 PM

Re: 2 truck tilts, one original, one re-done
 
3 Attachment(s)
The rest of the pics.

bowties11 04-04-2014 04:56 PM

Re: 2 truck tilts, one original, one re-done
 
Would you consider 250.00 for the one that needs restored thanks

396ci 04-04-2014 05:54 PM

Re: 2 truck tilts, one original, one re-done
 
I would like to know what you would sell both for? Shipping to Modesto Ca 95356. Thanks.

myyamr7 04-04-2014 06:38 PM

Re: 2 truck tilts, one original, one re-done
 
I'll do $425 shipped to 02825 for the nice one

ls1nova71 04-04-2014 09:42 PM

Re: 2 truck tilts, one original, one re-done
 
Quote:

Originally Posted by bowties11 (Post 6612023)
Would you consider 250.00 for the one that needs restored thanks

I would do $260, if you're interested let me know and give me a zip code so I can get a shipping quote.
Quote:

Originally Posted by 396ci (Post 6612085)
I would like to know what you would sell both for? Shipping to Modesto Ca 95356. Thanks.

I could go $675 for both. Youre second in line on the unrestored one. Would have to get a shipping quote on monday.
Quote:

Originally Posted by myyamr7 (Post 6612136)
I'll do $425 shipped to 02825 for the nice one

I may do that, but would need to check on shipping first. Youre second on line on it.

Thanks

bowties11 04-05-2014 12:40 AM

Re: 2 truck tilts, one original, one re-done
 
Quote:

Originally Posted by bowties11 (Post 6612023)
Would you consider 250.00 for the one that needs restored thanks

thanks for the price but I have found one for 260.00 shipped but thanks though

Steve Cole 04-05-2014 05:09 PM

Re: 2 truck tilts, one original, one re-done
 
Put me in line for either one.

jjzepplin 04-05-2014 06:12 PM

Re: 2 truck tilts, one original, one re-done
 
How much for the snake in pic #3 ?

72ironmike 04-05-2014 06:50 PM

Re: 2 truck tilts, one original, one re-done
 
Quote:

Originally Posted by ls1nova71 (Post 6612009)
The next one is the nice one. This tilt has been completely disassembled cleaned up, painted all bearings checked and lubed and reassembled. It has a new turn signal switch. The levers are nice originals. It has a short shifter that most people prefer when using a smaller steering wheel. I have a long one, but the chrome is not very good on it. There is no play in this column. $425 plus shipping. I can take pictures of any part that isn't shown in these pics, just ask.

Rick, How many of these have you done ? I'd bet you could do it blindfolded !

dbb1025 04-05-2014 10:07 PM

Re: 2 truck tilts, one original, one re-done
 
Put me in line for the refurbished unit.

72ironmike 04-07-2014 06:43 AM

Re: 2 truck tilts, one original, one re-done
 
Here's a bump ttt

Steve Cole 04-07-2014 09:33 AM

Re: 2 truck tilts, one original, one re-done
 
Where are we with these tilts? Any updates? Thanks.

ls1nova71 04-07-2014 11:00 AM

Re: 2 truck tilts, one original, one re-done
 
Quote:

Originally Posted by 396ci (Post 6612085)
I would like to know what you would sell both for? Shipping to Modesto Ca 95356. Thanks.

I went by the post office this morning, and well, shipping columns isn't cheap! They weigh 18lbs a piece, so shipping to 95356 would be around $52, and the less than helpful woman behind the counter said there may be a surcharge, but wasn't willing to tell me if for sure or how much. :banghead: But you're up on them both if you're still interested.

mcbassin 04-07-2014 11:04 AM

Re: 2 truck tilts, one original, one re-done
 
Quote:

Originally Posted by ls1nova71 (Post 6616628)
I went by the post office this morning, and well, shipping columns isn't cheap! They weigh 18lbs a piece, so shipping to 95356 would be around $52, and the less than helpful woman behind the counter said there may be a surcharge, but wasn't willing to tell me if for sure or how much. :banghead: But you're up on them both if you're still interested.

Not sure if it would help you but UPS or FedEx is usually way cheaper than USPS on heavier items. But you need to box them up yourself don't take them to a UPS store or similar. good luck with the sale.

ls1nova71 04-07-2014 11:07 AM

Re: 2 truck tilts, one original, one re-done
 
Quote:

Originally Posted by Steve Cole (Post 6616462)
Where are we with these tilts? Any updates? Thanks.

You're next in line on the unrestored one and second in line on the restored one. Waiting to see if 396ci wants them both.

Quote:

Originally Posted by jjzepplin (Post 6613588)
How much for the snake in pic #3 ?

Haha! I didn't realize that was in the pic. My hunter cat brought that home one day, she thought she really had something, and at first , so did I!

Quote:

Originally Posted by 72ironmike (Post 6613639)
Rick, How many of these have you done ? I'd bet you could do it blindfolded !

I can't count that high Mike! It's like riding a bike though, it just comes back to you when you do them.

myyamr7 04-07-2014 11:22 AM

Re: 2 truck tilts, one original, one re-done
 
I'm still interested in the good one if 396 passes.

Thanks

Steve Cole 04-07-2014 01:21 PM

Re: 2 truck tilts, one original, one re-done
 
Will you check with Fed Ex or UPS for their rates?

396ci 04-07-2014 01:41 PM

Re: 2 truck tilts, one original, one re-done
 
Quote:

Originally Posted by ls1nova71 (Post 6616628)
I went by the post office this morning, and well, shipping columns isn't cheap! They weigh 18lbs a piece, so shipping to 95356 would be around $52, and the less than helpful woman behind the counter said there may be a surcharge, but wasn't willing to tell me if for sure or how much. :banghead: But you're up on them both if you're still interested.

Seems like a hassle. I will pass since I still dont know what the final price is. Thanks for your time.

chevyguy_72 04-07-2014 02:17 PM

Re: 2 truck tilts, one original, one re-done
 
I might be interested in the restored one... can you ship greyhound?
FedEx tends to be the cheapest of the other 3 in my experience...
shipping to 32226

ls1nova71 04-07-2014 10:20 PM

Re: 2 truck tilts, one original, one re-done
 
Quote:

Originally Posted by myyamr7 (Post 6612136)
I'll do $425 shipped to 02825 for the nice one

You're up if you're still interested. I have an idea on what shipping will be, but not exact, but if you want it I can do $435 shipped.

ls1nova71 04-07-2014 10:23 PM

Re: 2 truck tilts, one original, one re-done
 
Quote:

Originally Posted by Steve Cole (Post 6613514)
Put me in line for either one.

You're up for the unrestored one, and I could do $285 shipped on it. Unless you want to wait and see if the restored one sells.

myyamr7 04-07-2014 10:25 PM

Re: 2 truck tilts, one original, one re-done
 
Quote:

Originally Posted by ls1nova71 (Post 6617862)
You're up if you're still interested. I have an idea on what shipping will be, but not exact, but if you want it I can do $435 shipped.


I'll take it! How do you want payment, paypal ok? Let me know, PM what you would like me to do.
Thanks


All times are GMT -4. The time now is 02:18 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com