Bell Tech or Mcgaughys or Western Chassis
 

Who makes the best spindles and why? Go!

Re: Bell Tech or Mcgaughys or Western Chassis
 

those 3 are the best imo. i went with mcgaughys though. i wouldnt hesitate to use any of them.

Re: Bell Tech or Mcgaughys or Western Chassis
 

I got western chassis so I wouldn't have problems running my rallys

Re: Bell Tech or Mcgaughys or Western Chassis
 

That's what I'm gonna be running as well

Re: Bell Tech or Mcgaughys or Western Chassis
 

some 2.5" and 3" spindles will have some rubbing issues with stock rallys an with the western chassis ones you dont

Re: Bell Tech or Mcgaughys or Western Chassis
 

I just ordered the Mcgaughys but I will be running 7" rallies on front, wanted 8s but the 7s were free.

Re: Bell Tech or Mcgaughys or Western Chassis
 

Which are made in the USA? That is what I would look for.

Re: Bell Tech or Mcgaughys or Western Chassis
 

Would like to know which are made in USA as well

Re: Bell Tech or Mcgaughys or Western Chassis
 

Belltech, Western, and Early Classic are made in USA. Don't know about the others.

Re: Bell Tech or Mcgaughys or Western Chassis
 

Do any of these tuck the wheels in more than the others?

Re: Bell Tech or Mcgaughys or Western Chassis
 

I have all Western Chassis parts on my 76 & have been very pleased with them.

In fact, after using WC parts on the 76 I decided to use their parts on my 98 and was pleased again.

I will say I've used BellTech parts a lot too with no issues but I don't have any experience with McG's parts.

Re: Bell Tech or Mcgaughys or Western Chassis
 

Will these work on 15x8 rallys with a 4" BS?, need to bring the front end down a couple of inches but don't want any rubbing issues :waah:

Re: Bell Tech or Mcgaughys or Western Chassis
 

malo don't you have spindles and springs or do you jus have springs?

Re: Bell Tech or Mcgaughys or Western Chassis
 

Springs ;)

Re: Bell Tech or Mcgaughys or Western Chassis
 

idk fersure the bs on stock 15x8 but it might be 4" so I don't see why not maye some one else can help out on the bs

Re: Bell Tech or Mcgaughys or Western Chassis
 

McGaughys are made in the Usa, California that is. Used several of their kits on all kinds of different vehicles and have never had a problem. Easy to deal with on the phone too. Havent used Western since the late 90s but had problem fitting their c-notch. Hope this helps out a little.

Re: Bell Tech or Mcgaughys or Western Chassis
 

Thanks I appreciate all of the replies y'all !

Re: Bell Tech or Mcgaughys or Western Chassis
 

Define "Made in USA". Is buying castings from China then final machining in the USA qualify?

Re: Bell Tech or Mcgaughys or Western Chassis
 

I have Western chassis on my 87 there for the 3/4 ton (had to upgrade rotors and calipers) and can no longer use my 15x8 rally's up front and my 17's with 4" BS rubbed till i took my grinder to the LCA's

Re: Bell Tech or Mcgaughys or Western Chassis
 

Re: Bell Tech or Mcgaughys or Western Chassis
 

I bought the Mcgaughys spindles and installed a pair of Powerslot rotors while I was at it http://i1050.photobucket.com/albums/...200879E8D0.jpg