Auxilliary spring /overload spring mounts needed
 

Need the 2 bottom mounts for a 12 bolt chevy w/factory overload/auxilliary springs. Pic is what I need....thanks

Re: Auxilliary spring /overload spring mounts needed
 

I think I have a set off of a 3/4 ton. Do you know what the center is on the holes. If you want I can see what mine are.
Paul

Re: Auxilliary spring /overload spring mounts needed
 

i can get a measurement off another set i have. i have two trucks im working on. have a full set and then a set missing the lower mounts.

Re: Auxilliary spring /overload spring mounts needed
 

4 1/4 -4 3/8 somewhere in there. mount is around 11" by 5" total size.

Re: Auxilliary spring /overload spring mounts needed
 

holes are 3/4". i can replace the bumpers if they aren't there

Re: Auxilliary spring /overload spring mounts needed
 

Sorry for the slow reply. Mine are 4 1/4" bolt centers 13/16" diameter holes. If you want to send me a pm with an email address or phone number I can send you a picture. I was thinking $20 plus shipping.
Paul

Re: Auxilliary spring /overload spring mounts needed
 

PM sent, and thanks for the reply.

Re: Auxilliary spring /overload spring mounts needed
 

I have an nos set kicking around some where. I definitely have but exactly what box they are in I couldn't say right now. I'm not even sure what I'd want for them. If you don't find some you want let me know.

Ray

Re: Auxilliary spring /overload spring mounts needed
 

I have a set. Let me know if you have not found them. Thanks, Roger

Re: Auxilliary spring /overload spring mounts needed
 

I have a set, but don't really want to separate them from the overload springs themselves...

They are in this thread:
http://67-72chevytrucks.com/vboard/s...d.php?t=550666
I could do $50 shipped on the whole set.

Re: Auxilliary spring /overload spring mounts needed
 

Looks like I found a set, I'll let you know if it falls through. Thanks to all for the replies