The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   S10 S15 Luv Blazer (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=130)
-   -   98 Blazer leaning out at full throttle (https://67-72chevytrucks.com/vboard/showthread.php?t=625577)

RT Big Block 04-18-2014 04:00 PM

98 Blazer leaning out at full throttle
 
I am so ready to go nuts ! I have 98 blazer that leans out at full throttle but if you lift a little it start pulling again. When you give hard throttle the O2 sensors voltage drops to 0.492 showing it leaning out . I have no vacuum leaks I Just replace intake gaskets my fuel pressure is 60 lbs. and does not leak down . Here the weird thing after I stop and put gas in it when I start it up it try to died when I pull back on the road. So does anyone have any idea what wrong ??? Thank !

terry b 04-27-2014 02:05 PM

Re: 98 Blazer leaning out at full throttle
 
You have fuel pressure but what about volume? Maybe kinked fuel line or blocked tank pickup.

68C15 04-27-2014 03:19 PM

Re: 98 Blazer leaning out at full throttle
 
.492 is not lean, it's mid-range.

95 S_Trucker 04-29-2014 11:57 AM

Re: 98 Blazer leaning out at full throttle
 
When monitoring oxygen sensors, you need a scanner that will graph, not just a scanner that will give you a number. Did it do it before you replaced intake gaskets? Is the check engine lamp on? Any Codes?


All times are GMT -4. The time now is 04:52 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com