The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- The 1967 - 1972 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=3)

- - CPP control arms (https://67-72chevytrucks.com/vboard/showthread.php?t=625623)

CPP control arms

Can someone help me I bought CCP upper and lower tubular control arm. On the passenger side I have no shims and on the driver side I have about 7/8" of shims and still have negative camber. On the driver side I do not have any more bolt to shim it. I do not like how I'm at the end of the bolt

Re: CPP control arms

Quote:

Originally Posted by TS-C10 (Post 6635656)

Here's a picture that may help. I also have the tubular cpp arms. No idea if its in alignment spec or not. I know the uppers are built longer to help with minimal alignment shims.