![]() |
bbw /c-60 question
i located a 66 gmc -c-60 with the big back window ! does anybody know if the complet cab backside is the same as a 1/2-3/4 ton truck ? looks same ? maybe cab mounts are differant ?
|
Re: bbw /c-60 question
In general, it's the same cab.
Dash is different and cab mounts are convertible, (can be converted) It is 100% easier to "re-cab", changing the dash and fitting the cab to a 1/2 ton frame than it is to do a BBW conversion. Just saying |
Re: bbw /c-60 question
Yes the cabs are basically the same with a few differences. The biggest difference is the lack of a trans tunnel/hump in the floor. As 66-PMD-GMC said, you could use the whole cab, as long as it is not a LCF cab
|
Re: bbw /c-60 question
Your in the wrong area, btw ....
|
Re: bbw /c-60 question
chris apache -junction -NO its easier to do the window change ! the roof had something big dropped on it ! just seen the truck, thought the price might be right for a bb window conversion
|
Re: bbw /c-60 question
Most of the BBW conversions I have seen look OK but ....
IMHO.... to do it correctly the roof skin should be pulled so that the top seam can be welded right. Of course I have only done this conversion a couple dozen times so I'm still learning. ;-) Then again, you have your eyes on the job so you would know best.... Good luck on your job! :5150: |
| All times are GMT -4. The time now is 07:00 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com