1980 C10 Stepside wood bed specs?
 

As the title says it all I am looking for the specifications for a 1980 C10 wooden bed. It is step side and I looked at MAR-k, and GMC Pauls and did not find the info. I have ran across it once or twice on the site but for some reason cannot relocate it now. Any help is appreciated.

Thanks,

Larey

Re: 1980 C10 Stepside wood bed specs?
 

What kind of specs are you looking for?

Re: 1980 C10 Stepside wood bed specs?
 

Looking for the measurements for length, height, and width. Also any info on the grooves that need to be cut and that spacing as well.

Re: 1980 C10 Stepside wood bed specs?
 

Length, height and width of the bed wood? Not trying to be difficult.

there 1x8's southern yellow pine
I can measure the length and dados depths also later today

Re: 1980 C10 Stepside wood bed specs?
 

77" long
Groove is in 3/8 from edge and a 1/4" wide
edge is 5/8" tall from underside
Groove is roughly7/16 deep from underside

Note all measurements taken from 40 yr old stock bed wood. So there obviously has been shrinking

Re: 1980 C10 Stepside wood bed specs?
 

Thanks for the quick response. I will get my bed done and post pic's.