The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   Blazer and Suburban Stuff (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=199)
-   -   PA floor boards, bed floor, fire wall, rocker box (https://67-72chevytrucks.com/vboard/showthread.php?t=628126)

1rippen6 05-08-2014 09:58 PM

floor boards, bed floor, fire wall, rocker box
 
5 Attachment(s)
Floor board, bed floor, and fire wall tell me what you need and I will give you a price with shipping (or better yet show me with paint and give me dimensions). Dash 40 dollars plus shipping unless you just want around the radio and then 40 shipped. PS rocker box 75 plus shipping. Road trip this weekend so I might not get back to you until Monday.

1rippen6 05-08-2014 10:01 PM

Re: floor boards, bed floor, fire wall, rocker box
 
1 Attachment(s)
one more pic

1rippen6 05-17-2014 10:22 PM

Re: floor boards, bed floor, fire wall, rocker box
 
ttt

briank 05-21-2014 12:40 PM

Re: floor boards, bed floor, fire wall, rocker box
 
Would you cut the floor board? I need drivers side , mainly the seat platform but lets say approx up until the furthest front offset bead and I suppose split behind where she meets the hump in the center. On the ricker side I suppose up until where the floor meets the inner rocker.

1rippen6 05-21-2014 12:50 PM

Re: floor boards, bed floor, fire wall, rocker box
 
1 Attachment(s)
Is this what you are talking about? If so I will get a shipping quote tonight what is your zip

briank 05-21-2014 12:54 PM

Re: floor boards, bed floor, fire wall, rocker box
 
Almost right on the money, on rocker side you can cut a hair lower,up to where its jagged. Im in Illinois, 60531. Thanks

michael.howell12 05-21-2014 06:28 PM

Re: floor boards, bed floor, fire wall, rocker box
 
1 Attachment(s)
I will take this piece to area code 36092. I don't see it listed, but I'm also looking for the top of the windshield frame if it's available.

michael.howell12 05-21-2014 07:03 PM

Re: floor boards, bed floor, fire wall, rocker box
 
1 Attachment(s)
I would be interested in the last 12-15 inches of the bed floor also if it is the width of the bed. Area code 36092

michael.howell12 05-21-2014 07:33 PM

Re: floor boards, bed floor, fire wall, rocker box
 
1 Attachment(s)
I would like to see close up pictures to this. How bad is it?

1rippen6 05-21-2014 10:10 PM

Re: floor boards, bed floor, fire wall, rocker box
 
Sorry gentleman I am going on vacation tomorrow and time got away from me so I will get ever one taken care of next week

1rippen6 05-25-2014 08:29 PM

Re: floor boards, bed floor, fire wall, rocker box
 
2 Attachment(s)
Hello all I am back from vacation

Briank - 65 shipped
michael.howell12 - It is blown out on the one mount please look at picture.The rear floor I had pictured was not a complete width. I have another floor that is complete width please see picture. The end that is picture is the end that attaches to the front floor board if that makes sense to you. If interested in either one let me know and I will get quotes with shipping.

briank 05-27-2014 10:31 AM

Re: floor boards, bed floor, fire wall, rocker box
 
1rippen6, Ill pass. I looked back at my floor and I think my new inner rocker will take care of most of my damage. Thanks for your time

1rippen6 05-27-2014 12:25 PM

Re: floor boards, bed floor, fire wall, rocker box
 
No problem the shipping was a killer on a piece that big 40 dollars from FedEx

1rippen6 06-15-2014 04:22 PM

Re: floor boards, bed floor, fire wall, rocker box
 
ttt

1rippen6 06-20-2014 05:26 PM

Re: floor boards, bed floor, fire wall, rocker box
 
3 Attachment(s)
ttt one more time before scrapping I have the rocker box cut off it is a little thin on the one end look at pictures. I will cut seat brackets off the floor board if needed let me know.

cudaman 06-21-2014 02:52 PM

Re: floor boards, bed floor, fire wall, rocker box
 
1rippen6,
I need a section of the bed floor 12" x 12". Something that will fit in a flat rate box will work .Area code 30152.

1rippen6 06-21-2014 11:01 PM

Re: floor boards, bed floor, fire wall, rocker box
 
Medium flat rate is 12.35 so 30 shipped let me know.

cudaman 06-22-2014 08:14 AM

Re: floor boards, bed floor, fire wall, rocker box
 
Will you pm me your payment info, thanks.

1rippen6 06-23-2014 01:48 PM

Re: floor boards, bed floor, fire wall, rocker box
 
cudaman pm sent

kaphillips 06-23-2014 07:04 PM

Re: floor boards, bed floor, fire wall, rocker box
 
Was this a bucket seat cab. If so I will take the brackets and cross sill brace cut out. Thanks lmk.

1rippen6 06-23-2014 07:15 PM

Re: floor boards, bed floor, fire wall, rocker box
 
It is a blazer floor so it was bucket seats will that work for what you need?

kaphillips 06-23-2014 07:27 PM

Re: floor boards, bed floor, fire wall, rocker box
 
Quote:

Originally Posted by 1rippen6 (Post 6733174)
It is a blazer floor so it was bucket seats will that work for what you need?

The cross sill brace is box ended on a blazer and is different on a truck bucket cab. I will pass. Thanks for the response.

1rippen6 06-23-2014 10:49 PM

Re: floor boards, bed floor, fire wall, rocker box
 
cudaman you piece is cut and should ship out tomorrow after work

1rippen6 06-25-2014 09:47 PM

Re: floor boards, bed floor, fire wall, rocker box
 
cudaman pm sent

1rippen6 07-07-2014 11:53 AM

Re: floor boards, bed floor, fire wall, rocker box
 
ttt


All times are GMT -4. The time now is 05:59 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com