The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   Projects and Builds (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=205)
-   -   Tube Frame 53 (https://67-72chevytrucks.com/vboard/showthread.php?t=628335)

Guilty By Design 05-10-2014 11:57 PM

Tube Frame 53
 
Got this truck in the shop for a full tube frame, LS swap, air ride, fuel cell and some cosmetic sheetmetal repair. The customer gave me full freedom to do what I wanted, only thing he needed was a trailer hitch.

Ive build dozens of frames out of square tube but never one out of round, and me and the old man have been cranking out rock crawler and rzr cages like crazy lately so I decided to build this one out of round and take advantage of all that space under these trucks. I really like how tootsie was built so I first laid everything out in bend tec
http://img.photobucket.com/albums/v2...ps4ab4fc74.jpg

Then started bending and notching
http://img.photobucket.com/albums/v2...psddf10443.jpg

sleeved my joints
http://img.photobucket.com/albums/v2...ps00db21c9.jpg

And got my front clip installed. This is a modified mustang II frontend I designed and have used on a few of my builds. It uses the same spindles, rotors and calipers, rack & pinion as a mII setup but I played with the geometry to get up to 10'' of travel with only 3* camber change and just works better laying out with big wheels. It uses offset tab inserts in the upper arm mounts to get its adjustment, its similar to the new GM and dodge mounts, only with the inserts the arms can never slip out of adjustment.
http://img.photobucket.com/albums/v2...ps8d2af58e.jpg

Cab mounts
http://img.photobucket.com/albums/v2...psdbb8cbc8.jpg
http://img.photobucket.com/albums/v2...ps609c1ae0.jpg
http://img.photobucket.com/albums/v2...ps3cd155c7.jpg

4.8 LS going in. It fit like a glove.
http://img.photobucket.com/albums/v2...pseb2a893c.jpg

4 link tabs
http://img.photobucket.com/albums/v2...psa09116e7.png

Center section
http://img.photobucket.com/albums/v2...ps6c17fdad.png

That's what 2 days have got me. Ill be ordering the frontend parts and all the air management on Monday.

Russell Ashley 05-11-2014 08:04 AM

Re: Tube Frame 53
 
Can't wait to see more of this build. You work fast if you did that all in two days.

Rednek13x 05-11-2014 08:28 PM

Re: Tube Frame 53
 
wow looking forward to this build! should be a quick one if you got that much done in 2 days!

xpickup 05-11-2014 10:22 PM

Re: Tube Frame 53
 
Guilty by Design, Great looking chassis. I love the design of it. I started to build one for a buddy years ago. It was made out of 1 5/8 tube. It never got finished because he lost his job and then started a business. But at least it was a roller. I can not wait to see more.

Shannon

_Ogre 05-11-2014 11:05 PM

Re: Tube Frame 53
 
i like what i see already :D

oldman3 05-11-2014 11:30 PM

Re: Tube Frame 53
 
Wow, I'm amazed at the talent on this site...Jim

Guilty By Design 05-12-2014 09:56 PM

Re: Tube Frame 53
 
Thanks for the words. I ordered all the air management, balljoints and reamer bit, and front brakes today. Tomorrow the customer is bringing the cab over so I can mount it with the running boards and get my final placement of the motor. Speaking of the motor we realized today that the drivers side head is cracked (junkyard motor) so if he can get the yard to replace it he may pay up and get a 5.3. Our biggest hang up right now is the wheels, he wants 15'' steel rally wheels and finding a matching set locally is difficult. I think were looking for 2wd front wheels and 4wd rears (the 4wd wheels being wider) so I gotta get those located pretty soon.

Guilty By Design 05-12-2014 09:58 PM

Re: Tube Frame 53
 
Quote:

Originally Posted by xpickup (Post 6669432)
Guilty by Design, Great looking chassis. I love the design of it. I started to build one for a buddy years ago. It was made out of 1 5/8 tube. It never got finished because he lost his job and then started a business. But at least it was a roller. I can not wait to see more.

Shannon

That blows, but if theres one thing I know its seeing your work go nowhere. I had 6 trucks in my shop get wiped out by a tornado a few years back. BTW why 1 5/8''? Just like doing math with odd numbers?

Guilty By Design 05-16-2014 10:06 PM

Re: Tube Frame 53
 
Got a few hours his week to work on it. We located the wheels and tires were gonna run.
http://img.photobucket.com/albums/v2...psf8344c45.png
Most of the parts showed up late today so I couldn't do a lot. Got all the air management, balljoints, and rack & pinion.
http://img.photobucket.com/albums/v2...psa6c4a8ed.jpg
Fixed some rust while I waited on parts
http://img.photobucket.com/albums/v2...ps4db44ac8.jpg
http://img.photobucket.com/albums/v2...pse6bd8193.jpg
http://img.photobucket.com/albums/v2...pseaa7667d.jpg
http://img.photobucket.com/albums/v2...psb85e7480.jpg

And got the motor mounted
http://img.photobucket.com/albums/v2...ps02cf619e.jpg

FarmerSid 05-17-2014 07:20 AM

Re: Tube Frame 53
 
Nice progress. Did you put in a new cab mount? Did you coat the area in between the inner and outer cowl area with anything before you welded in the new inner cowl? One thing that irritated me with the new floor pan is that my original battery cover doesn't fit in the new opening. The radius in the corners is larger than the cover.

Guilty By Design 05-18-2014 12:02 AM

Re: Tube Frame 53
 
I got some weld thru primer on the underside, we will have it rhino lined before it hits the road. I didn't replace the cab mount piece since it was ugly, but still sturdy. These panels fit great tho. He said he got them through LMC but I cant recall the brand name.

FarmerSid 05-18-2014 06:33 AM

Re: Tube Frame 53
 
I got mine through LMC too. I think they said Tri Plus on them.

Budman56 05-19-2014 02:12 PM

Re: Tube Frame 53
 
Almost to afraid to ask, but what would a chassis cost like you have built, just the chassis no running gear? I have a 54 gmc I am looking for a chassis for and this one would fit the bill.

69CST-V 05-19-2014 05:32 PM

Re: Tube Frame 53
 
Nice work.... Subscribed.

Guilty By Design 05-19-2014 10:21 PM

Re: Tube Frame 53
 
without a rearend too? I would imagine i could have the rails, crossmember, and 4 link build for around $3500-4000.

Guilty By Design 06-06-2014 10:19 PM

Re: Tube Frame 53
 
Had some time to play with it between jobs. Got the cab, frontend, and running boards mounted, 4 link done, 23gal alum fuel cell fabbed and mounted, and im getting all the air management placed under the cab as well.
http://img.photobucket.com/albums/v2...pse157f1e3.jpg
http://img.photobucket.com/albums/v2...pse9c4f63c.jpg

youngrodder 06-06-2014 10:42 PM

Re: Tube Frame 53
 
Your killin it. it looks really nice.
Keep it up.

Marc

Bomp 06-06-2014 11:38 PM

Re: Tube Frame 53
 
This truck build is slick

oldman3 06-06-2014 11:54 PM

Re: Tube Frame 53
 
Sweet...Jim

Guilty By Design 09-10-2014 10:19 PM

Re: Tube Frame 53
 
Finally got some time to work on it lately. Its a full roller for now and the owner will be bringing it back over the fall and winter to finish up some details. We ended up getting another 4.8 LS1 for it and sending the harness and computer off to get tweaked on. After throwing on some shorty headers and clearing out some sheetmetal she fits in there snug.
http://img.photobucket.com/albums/v2...ps009c1721.jpg
Just some shots from underneath. The best part of him bringing me a pile of 65 year old parts is its leaving with a modern frame and drivetrain... but still looking like a 65 year old pile of parts.
http://img.photobucket.com/albums/v2...psdc6e5063.jpg
http://img.photobucket.com/albums/v2...pse85cb150.jpg
http://img.photobucket.com/albums/v2...ps6891547d.jpg

Ill get some full pics of it outside tomorrow.

oldman3 09-10-2014 10:34 PM

Re: Tube Frame 53
 
Looking good...Jim

Guilty By Design 09-11-2014 10:46 PM

Re: Tube Frame 53
 
http://img.photobucket.com/albums/v2...ps29234048.jpg
http://img.photobucket.com/albums/v2...psfe27f97c.jpg
http://img.photobucket.com/albums/v2...ps8da61782.jpg

oldman3 09-11-2014 11:39 PM

Re: Tube Frame 53
 
Now that's on the ground!!!...Jim

Chris. 09-12-2014 09:17 AM

Re: Tube Frame 53
 
Looks really good

69CST-V 09-12-2014 12:20 PM

Re: Tube Frame 53
 
X2


All times are GMT -4. The time now is 08:27 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com