The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   projects and builds (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=197)
-   -   Lay rocker or lay door.... Need your vote (https://67-72chevytrucks.com/vboard/showthread.php?t=628611)

Free Candy Inside 05-13-2014 12:51 AM

Lay rocker or lay door.... Need your vote
 
1 Attachment(s)
I'm debating cutting the rotted rockers off my panel truck. The frame was 8" tall under the can being a 1ton. We added 3x5 box to the frame. We cut an inch off the bottom of the frame so it's level and then took 2" off the top of the frame under the cab. At this point I already have to redo the floors anyways because of rot. If I body drop it another 2" roughly I can basically lay door. My only concern is at that point I need to drop the frame horns down about 4"s. Also have to cut off the rear 4"s.

Besides the steering (which I have to redo anyways) what other issues may I run into. Plan on just running some 15s with 75 series tires. I get roughly 13" of lift in the front. I don't want to run into hood issues.

So I need your vote. Lay rocker or door here's some pics.

markeb01 05-13-2014 03:03 AM

Re: Lay rocker or lay door.... Need your vote
 
From a practical standpoint it seems like it would be better to keep the rockers, so the bottom of the doors wouldn't be torn up by the pavement when the chassis is laid out, and someone wants to get in or out of the vehicle.

Free Candy Inside 05-13-2014 08:45 AM

Re: Lay rocker or lay door.... Need your vote
 
Quote:

Originally Posted by markeb01 (Post 6671219)
From a practical standpoint it seems like it would be better to keep the rockers, so the bottom of the doors wouldn't be torn up by the pavement when the chassis is laid out, and someone wants to get in or out of the vehicle.

I plan on putting some strapping under the door so it won't actually sit on the door. Probably 3/16 or 1/4 strapping.

racecougar 05-13-2014 09:33 AM

Re: Lay rocker or lay door.... Need your vote
 
IMO, it just won't look right without rocker panels.

1963c-10 05-13-2014 10:52 AM

Re: Lay rocker or lay door.... Need your vote
 
I say keep the rockers....just my opinion....

rusty76 05-13-2014 05:53 PM

Re: Lay rocker or lay door.... Need your vote
 
Keep'em rockers.

SCOTI 05-14-2014 12:51 PM

Re: Lay rocker or lay door.... Need your vote
 
Keep the rockers. Vehicles just don't look right w/o them. Make them shorter if you just have to be that much closer to the ground.
Quote:

I get roughly 13" of lift in the front. I don't want to run into hood issues.

How are you achieving 13" of front lift?

TJ's Chevy 05-14-2014 07:19 PM

Re: Lay rocker or lay door.... Need your vote
 
Keep the rockers. :chevy:

Fatherof3 05-14-2014 08:00 PM

Re: Lay rocker or lay door.... Need your vote
 
Quote:

Originally Posted by racecougar (Post 6671421)
IMO, it just won't look right without rocker panels.

2x

beefshreadder116 05-15-2014 01:21 AM

Re: Lay rocker or lay door.... Need your vote
 
lay door! never seen it done before and you could be that guy. plus who wants to replace rust when you could drag it off.

Free Candy Inside 05-15-2014 10:11 PM

Re: Lay rocker or lay door.... Need your vote
 
Quote:

Originally Posted by SCOTI (Post 6673269)
Keep the rockers. Vehicles just don't look right w/o them. Make them shorter if you just have to be that much closer to the ground.

How are you achieving 13" of front lift?

That's what I thought I had before. I'm probably wrong. I'll check it again later. I just have some airlift 2600 bags


All times are GMT -4. The time now is 08:40 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com