WTB Plug Wire Looms and Heater Core Hose Bracket
 

Pics below, have a 66 327 and seeing that PO tossed these somewhere along the lines. Condition not important as long as not totally rusted, i'll blast and paint them. Need kind of ASAP because racing to get truck done for show mid December.

Re: WTB Plug Wire Looms and Heater Core Hose Bracket
 

is it the driver side u need?

Re: WTB Plug Wire Looms and Heater Core Hose Bracket
 

I should have the heater hose bracket let me know if you are still looking for it

Re: WTB Plug Wire Looms and Heater Core Hose Bracket
 

Edit: i meant show mid July, don't know where december came from.

Pimpston: need both side, and there might be a third bracket that comes off an oil pan bolt? I could probably get away with just the two rear brackets.

62 big window: do need it, sending pm.

Re: WTB Plug Wire Looms and Heater Core Hose Bracket
 

here is a couple pics of the bracket. PM if it looks like what you need...

Re: WTB Plug Wire Looms and Heater Core Hose Bracket
 

i only have an extra one for the starter side of the engine, the oem type thats metal with a slot for the wire loom, come to think of it they have 4 in the back 2 by the intake with the 4 grooves and 2 by the back of the block with the slots for the rubber holder thing, i have the slotted one thats by the block. i will send a pic in the am, but i dont think its the one u want...

Re: WTB Plug Wire Looms and Heater Core Hose Bracket
 

Someone on another thread pointed me in the direction of classicparts.com, which, i don't know how i missed, repops all the clips AND the heatshields.

If i get the other bracket off of 62bigwindow, i think i'll be set!

Re: WTB Plug Wire Looms and Heater Core Hose Bracket
 

thats where i got mine, or LMC not sure ive had crap since the 90's waiting to put on this beast..