The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- LSx Swaps (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=206)

- - Hydraulic upgrade (https://67-72chevytrucks.com/vboard/showthread.php?t=631616)

smoky02

06-07-2014 03:48 PM

Hydraulic upgrade

I'm installing a TR-6060 manual transmission into my C10. I have been doing research and a few different vehicles have a bracket that mounts the hydraulic slave cylinder behind the brake booster. Has anyone had any luck using one of the other vehicles brackets or if anyone makes a bracket for our trucks.

Thanks in advance,

Brandon

Clyde65

06-07-2014 04:48 PM

Re: Hydraulic upgrade

I believe Captn fab makes one

smoky02

06-07-2014 05:32 PM

Re: Hydraulic upgrade

I sent him a PM I hope he can help me out.

smoky02

06-08-2014 01:05 AM

Re: Hydraulic upgrade

I just spoke with captnfab and although this is on his list at this current time he doesn't make this. So if anyone that has done this can point me in the right direction that would be awesome.

smoky02

06-08-2014 10:51 AM

Re: Hydraulic upgrade

Anyone?

smoky02

06-10-2014 01:58 PM

Re: Hydraulic upgrade

Anyone

woodwright

06-11-2014 10:07 PM

Re: Hydraulic upgrade

I'm using a stock late model truck master, but I'm using hydroboost. Check into a f-body/camaro master. They're mounted down low with the pushrod angled up. I'm using one on my Nova. On our trucks, I would think you could adapt it to the stock linkage.

smoky02

06-12-2014 03:45 AM

Re: Hydraulic upgrade

Thank you Woodwright

Dale_Brown

10-06-2014 07:57 AM

Re: Hydraulic upgrade

I'm going to also make this conversion. Did you have any luck on making it happen?

smoky02

10-06-2014 09:01 AM

Re: Hydraulic upgrade

I haven't started yet. Will be in the near future. But haven't yet.

All times are GMT -4. The time now is 05:31 AM.