![]() |
Updated pics with 10 in rallies on old blue
5 Attachment(s)
Like some others here, my wait for Wheel Vintiques to come through is over..
|
Re: Updated pics with 10 in rallies on old blue
Looks great! Super sharp truck.
|
Re: Updated pics with 10 in rallies on old blue
Mine are 8 rims with 275/60/15 all the way around.... I'm thinking about 2inch spacers on the rear to move the wheels out some
|
Re: Updated pics with 10 in rallies on old blue
Nice
|
Re: Updated pics with 10 in rallies on old blue
Looks great, Poov!
What's the tire sizes and back spacing on the wheels? I've been thinking about getting a set of the car rallies from them for my old blue but it'll be a while. I have a lot of other stuff to finish first. Something else I noticed is the color in your chrome trim. Did you paint the drivers side black? I think I like it better than the yellow. Again, she's looks great :chevy: |
Re: Updated pics with 10 in rallies on old blue
That is a clean looking truck
|
Re: Updated pics with 10 in rallies on old blue
Quote:
|
Re: Updated pics with 10 in rallies on old blue
Good Lookin' Truck!
|
Re: Updated pics with 10 in rallies on old blue
Very clean truck Poov! What drop do you have and what size tires you running?
|
Re: Updated pics with 10 in rallies on old blue
Quote:
13 1/8" from the center wheel to the bottom of the fender in the rear and 12 3/4" front.. 275/60 rear and 255/60 front |
Re: Updated pics with 10 in rallies on old blue
Quote:
On the wheels, I was thinking of going with 8 and 275 on the front and 10 and 295 on the rear but now I don't know. Does yours scrub any on the front? (I have 275 tires on all four now....stock rallies) Looks like you have 255 on the front? Can't wait to get mine back on the road. We've got to get together and take some pics of them together when I do. They look like twins lol As far as the cam......Long story short is The cam is in along with a few other things. One thing lead to another and I just did a complete rebuild. Had a cracked head(882 head..didn't surprise me), needed a new timing gear and chain and the cylinder walls were out just enough that I thought it needed boring. Thought I might as well do it right and be done with it. Bored it .30 over and put some flat top pistons in it with a xe268 comp cam etc. I think everything is new except the block, crank and one head. Wasn't expecting to spend that much on it so it has slowed down my progress lol She is almost ready to drop in though! Just stopped by Harrington's after work this morning and picked up the stall converter. They market this cam as one not needing a stall but Chris said I would need just a liitle more than the stock one. Said it would make me happier at the stop lights and it wasn't very expensive. Headers are next on the never ending list :) http://s5.postimg.org/h1td37rkn/8x6_350sbc.jpg |
Re: Updated pics with 10 in rallies on old blue
Quote:
|
Re: Updated pics with 10 in rallies on old blue
Quote:
|
Re: Updated pics with 10 in rallies on old blue
Quote:
|
All times are GMT -4. The time now is 11:54 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com