The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1967-1972 Chevrolet & GMC Pickups Parts Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=8)
-   -   FL Stepside bed parts!! (https://67-72chevytrucks.com/vboard/showthread.php?t=632096)

bigsnookmaster 06-11-2014 03:34 PM

Stepside bed parts!!
 
5 Attachment(s)
I have all my stepside bed parts that I have been saving for a while for sale!
All of these parts are GM

1-NOS passenger fender $500 It has 1 small dent (circled)
1-Drivers side fender. Used but nice. $150, or $600 for both Drivers side fender is SOLD!
1- set of long steps in very nice condition $80
2-sets of short steps $100 each set. 1st buyers choice, or $175 for both sets. Blue set SOLD!
2-set of step brackets $40 each set 1-set SOLD!
1-drivers side step bracket $20
1-set of stepside gravel guards with brackets $60 SOLD!
Misc. rear brackets $10 each
First I will take it gets it! No PMs unless it's for payment!!!
No shipping included!! I would prefer not to ship fenders

bigsnookmaster 06-11-2014 03:38 PM

Re: Stepside bed parts!!
 
5 Attachment(s)
More pics

bigsnookmaster 06-11-2014 03:42 PM

Re: Stepside bed parts!!
 
5 Attachment(s)
More

michael bustamante 06-11-2014 04:21 PM

Re: Stepside bed parts!!
 
Would you sell the gravel guards w/out the brackets? Any pics?

bigsnookmaster 06-11-2014 04:35 PM

Re: Stepside bed parts!!
 
I'd really like to keep them together.

michael bustamante 06-11-2014 04:39 PM

Re: Stepside bed parts!!
 
Ok still interested in pics

bigsnookmaster 06-11-2014 04:39 PM

Re: Stepside bed parts!!
 
5 Attachment(s)
More

michael bustamante 06-11-2014 04:41 PM

Re: Stepside bed parts!!
 
Can you give me a ship quote to nm 87121. The brackets look better than mine

Tinkermc 06-11-2014 09:23 PM

Re: Stepside bed parts!!
 
would like to buy pic #2 but I can not g to Florida at this time.My zip is 23901 if you decide at some point and time you would ship.
Thnkyou.

BC10 06-12-2014 01:44 AM

Re: Stepside bed parts!!
 
May be interested in the shortbed steps. Any close up pictures? Is the rust on them pitted at all? Thanks

Shortstep67 06-12-2014 09:55 AM

Re: Stepside bed parts!!
 
Interested in driver side fender, but I'm in Texas(78259). Let me know, thanks.

bill shanks 06-12-2014 10:21 AM

Re: Stepside bed parts!!
 
will you ship to ont canada L0K 1A0 i would like a set of step brackets and how do you want to be paid thanks

bigsnookmaster 06-12-2014 11:51 AM

Re: Stepside bed parts!!
 
Quote:

Originally Posted by michael bustamante (Post 6717128)
Can you give me a ship quote to nm 87121. The brackets look better than mine

I will try to get you a quote today
Quote:

Originally Posted by Tinkermc (Post 6717466)
would like to buy pic #2 but I can not g to Florida at this time.My zip is 23901 if you decide at some point and time you would ship.
Thnkyou.

I take it that you mean the passenger rear fender? I could possibly ship Greyhound, but wont be able to box it. I could wrap it on cardboard though

Quote:

Originally Posted by BC10 (Post 6717785)
May be interested in the shortbed steps. Any close up pictures? Is the rust on them pitted at all? Thanks

There is surface rust on the underside, but nothing through, They are very solid pieces. No dents in either set also.

Quote:

Originally Posted by Shortstep67 (Post 6718012)
Interested in driver side fender, but I'm in Texas(78259). Let me know, thanks.

I believe Tinkermc is also interested in this also.He will have first shot. Same as above, I would ship Greyhound wrapped in cardboard.

Quote:

Originally Posted by bill shanks (Post 6718056)
will you ship to ont canada L0K 1A0 i would like a set of step brackets and how do you want to be paid thanks

Bill,I would have to check with the post office on shipping. I will get back with you on this.

bigsnookmaster 06-12-2014 12:31 PM

Re: Stepside bed parts!!
 
Quote:

Originally Posted by Tinkermc (Post 6717466)
would like to buy pic #2 but I can not g to Florida at this time.My zip is 23901 if you decide at some point and time you would ship.
Thnkyou.

About $75

Quote:

Originally Posted by Shortstep67 (Post 6718012)
Interested in driver side fender, but I'm in Texas(78259). Let me know, thanks.

About $80

vweater2001 06-12-2014 01:28 PM

Re: Stepside bed parts!!
 
Interested in the long steps & the gravel guards. How much to ship to 91331? Let me know and thanks!!

Mando

Shortstep67 06-12-2014 01:32 PM

Re: Stepside bed parts!!
 
Sounds good, just let me know. Thanks

bigsnookmaster 06-12-2014 01:47 PM

Re: Stepside bed parts!!
 
Quote:

Originally Posted by bill shanks (Post 6718056)
will you ship to ont canada L0K 1A0 i would like a set of step brackets and how do you want to be paid thanks

Hey Bill, Shipping would be $45 US Dollars. I will accept Paypal. Let me know if you still want them. Thanks, Greg

bigsnookmaster 06-12-2014 01:58 PM

Re: Stepside bed parts!!
 
2 Attachment(s)
Quote:

Originally Posted by BC10 (Post 6717785)
May be interested in the shortbed steps. Any close up pictures? Is the rust on them pitted at all? Thanks

I bead blasted the inner corner to show what condition they are in. They are nice!

BC10 06-12-2014 02:26 PM

Re: Stepside bed parts!!
 
How much for shipping for the grey set of shortbed steps to 94080?

bigsnookmaster 06-12-2014 03:13 PM

Re: Stepside bed parts!!
 
Quote:

Originally Posted by BC10 (Post 6718330)
How much for shipping for the grey set of shortbed steps to 94080?

$30 bucks.

BC10 06-12-2014 08:30 PM

Re: Stepside bed parts!!
 
Would you take 120 shipped?
If so I will take the blue pair.

bigsnookmaster 06-12-2014 10:50 PM

Re: Stepside bed parts!!
 
Quote:

Originally Posted by BC10 (Post 6718825)
Would you take 120 shipped?
If so I will take the blue pair.

I will take $120, and 3% for paypal. It's kind of a pita finding boxes, and doing the shipping. You will be more than happy with these! Let me know.

BC10 06-12-2014 11:29 PM

Re: Stepside bed parts!!
 
Deal forward me your PayPal.

ksbrktracer 06-13-2014 12:18 AM

Re: Stepside bed parts!!
 
I will take the brackets and gravel guards if still available ..... Can pay immediately , shipping would be to 74108 , business address.

bigsnookmaster 06-13-2014 07:09 AM

Re: Stepside bed parts!!
 
Quote:

Originally Posted by vweater2001 (Post 6718262)
Interested in the long steps & the gravel guards. How much to ship to 91331? Let me know and thanks!!

Mando

Sorry I didn't get back with you! I will get you a shipping quote today!


All times are GMT -4. The time now is 04:24 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com