Need a 86+ firewall picture
 

I have been aquiring parts to swap an SM465/NP205 into my 86 K5. I would like to see some pics of factory hydraulic clutch firewall set-up. Pictures of the clutch pedal set-up would be great too. Thanks,

Jim

Re: Need a 86+ firewall picture
 

the best i have right now. this is an 86 K30 the slave is at the far right of the pic.

sorry its not better, but i can show you all the pics you may want of the jeep that it donated the clutch to!

http://i94.photobucket.com/albums/l8...15/m715167.jpg

Re: Need a 86+ firewall picture
 

Thanks Ryan.

Nobody can snap a pic of their firewall showing the clutch master cyclinder?

Re: Need a 86+ firewall picture
 

I can still use some pics of vac assist brakes, hydro clutch mounting on the firewall.

Re: Need a 86+ firewall picture
 

Here is my 86 with vacuum power brakes and hydraulic clutch SM465.
Attachment 1331875

Attachment 1331876

Let me know if you need more pics.

Re: Need a 86+ firewall picture
 

Nicely done, Silverbear.

Jims70GMC - I didn't see this until just now. You might get better response next time if you posted in the '73-'87 section.

K

Re: Need a 86+ firewall picture
 

That is perfect! Thanks!

I will be drilling the holes and installing the tranny this weekend. I found the dimples in the firewall to mount the master cylinder. I have a build thread going too.

Thanks again!