64-66 for parts
 

Just in a 64-66 3/4 ton 2 wd, not too much good on it, it was a 6 cylinder 4 speed truck, long bed fleetside.
Cab & doors, hood are sold, front fenders are gone
inner fenders & core support had rust & were scrapped

High hump trans cover $100 + shipping
Trailing arms 3/4 ton in good shape $120 pair + shipping
4 speed to 292 6 cylinder clutch linkage complete $60 + shipping
E brake arm $30
Original waterpump for core $15
292 side cover & valve cover, original distributor, water neck
OEM painted front bumper, pretty decent $80
Front bumper brackets $30 pair

overload rear springs, suspension parts are available, ask & I'll price
Parting it out tomorrow,so if your interested, act quickly!
Also for sale locally.
Thanks,
Tom

Re: 64-66 for parts
 

Interested in the high hump trans cover and can I get the upper piece it bolts to as well?
Shipping to 27028

Re: 64-66 for parts
 

62bigwindow, all I have is the hump cover that bolts in, I don't have the other piece.

Pics of the rear cab mounts & bed supports for bullwinkle, the only bed supports that were there were the rear 2.
I'd like $30 each for the cab supports & $15 for the 2 rear bed supports.
Thanks,
Tom

Re: 64-66 for parts
 

In the picture it's the section that the front of the hump bolts to
it has to be cut out.or the spot welds drilled out. I would like to get that piece with it

Re: 64-66 for parts
 

62 bigwindow, cab was sold already, the unbolted hump cover is all I have.

Re: 64-66 for parts
 

How much shipped to 27028

Re: 64-66 for parts
 

62 big window $117 shipped on the high hump
Thanks
Tom

Re: 64-66 for parts
 

Do you have the hood hinges and springs?

Re: 64-66 for parts
 

CSample, we should have a set from another truck, the set on this one was bent, you are just down the street, you should stop by.

Re: 64-66 for parts
 

Whats the addy?

Re: 64-66 for parts
 

Interested in the parking brake shipped to 30157; does it include the brake band and other hardware? (All mine has left are the posts where it mounts to the trans and the drum.)

Also interested in the right/passenger side engine perch/mount (that bolts to the frame).

(Might even be interested in the valve cover if it's the original one with the "Chevrolet" script, depending on price.)

Re: 64-66 for parts
 

Does it have the heater box on the firewall?

Re: 64-66 for parts
 

66 submarine, frame & all hardware went to scrap, I still have the valve cover its stamped Chevrolet, I'll get a pic & price.

Johns66 box is on the firewall, I'll get you a pic.
thanks,
Tom