The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1960 - 1966 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=6)
-   -   Rearview Mirror Arm Hole Template for Drilling (https://67-72chevytrucks.com/vboard/showthread.php?t=633817)

BigSix 06-26-2014 10:58 AM
Rearview Mirror Arm Hole Template for Drilling
 
My truck did not come with a factory rear view mirror. I bought a bracket from classic parts and now I just need to drill into the roof skin. Question is: does anyone have a factory measurement to the screw holes?

LVPhotos 06-26-2014 01:35 PM
Re: Rearview Mirror Arm Hole Template for Drilling
 
Is there dimples like the ones for the optional passenger side sun visor?

1963c-10 06-26-2014 02:18 PM
Re: Rearview Mirror Arm Hole Template for Drilling
 
1 Attachment(s)
This should help some

markeb01 06-26-2014 02:27 PM
Re: Rearview Mirror Arm Hole Template for Drilling
 
Just be careful when drilling. A couple of 1/4x20 nuts (or something similar) on the drill bit will insure you don't go too deep and hit the outer skin.

BigSix 06-26-2014 02:31 PM
Re: Rearview Mirror Arm Hole Template for Drilling
 
Perfect thanks boys.

j.kirn 06-26-2014 05:19 PM
Re: Rearview Mirror Arm Hole Template for Drilling
 
I guess they figured the 4 wheel drive models didn't need a rear view mirror

Woogeroo 06-29-2014 06:03 PM
Re: Rearview Mirror Arm Hole Template for Drilling
 
Is this style mirror for GMC's only or... a certain year model run?

Thanks.

-W

This thread was added to the Body Section / Interior category of your 60-66 FAQ Index.

NOTE : if this link changes in the future, look for the sticky at the top of the 1960-66 Message Board.

1963c-10 06-30-2014 08:38 AM
Re: Rearview Mirror Arm Hole Template for Drilling
 
Quote:
Originally Posted by Woogeroo (Post 6741154)
Is this style mirror for GMC's only or... a certain year model run?

Thanks.

-W

This thread was added to the Body Section / Interior category of your 60-66 FAQ Index.

NOTE : if this link changes in the future, look for the sticky at the top of the 1960-66 Message Board.
Should be all 60-66 trucks


All times are GMT -4. The time now is 06:54 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com